Portage is a package management system used by Gentoo Linux
# ChangeLog for net-mail/courier-imap
# Copyright 1999-2008 Gentoo Foundation; Distributed under the GPL v2
# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/ChangeLog,v 1.160 2008/05/21 18:57:42 dev-zero Exp $
21 May 2008; Tiziano Müller
courier-imap-3.0.8.ebuild:
Changed dependency for postgresql from dev-db/postgresql to
virtual/postgresql-server
17 Mar 2008;
courier-imap-4.0.1.ebuild, courier-imap-4.0.4.ebuild:
Drop to ~mips due to unstable deps
15 Mar 2008; Mark Loeser
courier-imap-4.0.1.ebuild, courier-imap-4.0.1-r1.ebuild,
courier-imap-4.0.1-r2.ebuild, courier-imap-4.0.4.ebuild,
courier-imap-4.0.6-r2.ebuild, courier-imap-4.1.2-r1.ebuild:
Add a blocker in RDEPEND on virtual/imap so we avoid manpage collisions; bug
#198633
02 Jul 2007; Piotr Jaroszyński
courier-imap-3.0.8.ebuild, courier-imap-4.0.1.ebuild,
courier-imap-4.0.1-r1.ebuild, courier-imap-4.0.1-r2.ebuild,
courier-imap-4.0.4.ebuild:
(QA) RESTRICT clean up.
12 Jun 2007; Marius Mauch
courier-imap-4.0.1.ebuild, courier-imap-4.0.1-r1.ebuild,
courier-imap-4.0.1-r2.ebuild, courier-imap-4.0.4.ebuild,
courier-imap-4.0.6-r2.ebuild, courier-imap-4.1.2-r1.ebuild:
Replacing einfo with elog
12 Apr 2007; Fernando J. Pereda
courier-imap-4.0.6-r2.ebuild:
Stable on alpha as per bug #168196
11 Apr 2007; Tobias Scherbaum
courier-imap-4.0.6-r2.ebuild:
ppc stable, bug #168196
10 Apr 2007; Gustavo Zacarias
courier-imap-4.0.6-r2.ebuild:
Stable on sparc wrt security #168196
09 Apr 2007; Raúl Porcel
courier-imap-4.0.6-r2.ebuild:
ia64 stable wrt security bug 168196
08 Apr 2007; Markus Rothe
courier-imap-4.0.6-r2.ebuild:
Stable on ppc64; bug #168196
07 Apr 2007; Jeroen Roovers
Stable for HPPA (bug #168196).
07 Apr 2007; Christian Faulhammer
courier-imap-4.0.6-r2.ebuild:
stable x86, security bug 168196
07 Apr 2007; Peter Weller
Stable on amd64 wrt bug 168196
*courier-imap-4.1.2-r1 (07 Apr 2007)
*courier-imap-4.0.6-r2 (07 Apr 2007)
07 Apr 2007; Luca Longinotti
-files/courier-imap-3.0.7-db4-bdbobj_configure.in.patch,
-files/courier-imap-3.0.7-db4-configure.in.patch,
-files/courier-imap-3.0.7-disable-fam-configure.in.patch,
+files/courier-imap-4.0.6-aclocal-fix.patch,
files/courier-imap-4.0.6-db4-bdbobj_configure.in.patch,
files/courier-imap-4.0.6-db4-configure.in.patch,
files/courier-imap-4.0.6-r1-courier-imapd.indirect,
files/courier-imap-4.0.6-r1-courier-imapd.rc6,
files/courier-imap-4.0.6-r1-courier-imapd-ssl.rc6,
files/courier-imap-4.0.6-r1-courier-pop3d.indirect,
files/courier-imap-4.0.6-r1-courier-pop3d.rc6,
files/courier-imap-4.0.6-r1-courier-pop3d-ssl.rc6,
files/courier-imap-4.0.6-r1-gentoo-imapd.rc,
files/courier-imap-4.0.6-r1-gentoo-imapd-ssl.rc,
files/courier-imap-4.0.6-r1-gentoo-pop3d.rc,
files/courier-imap-4.0.6-r1-gentoo-pop3d-ssl.rc,
-files/courier-imap-4.1.2-aclocal-fix.patch,
-files/courier-imap-4.1.2-db4-configure.in.patch, metadata.xml,
-courier-imap-3.0.7.ebuild, -courier-imap-4.0.6.ebuild,
-courier-imap-4.0.6-r1.ebuild, +courier-imap-4.0.6-r2.ebuild,
-courier-imap-4.1.2.ebuild, +courier-imap-4.1.2-r1.ebuild:
Remove old/unused versions with redundant/unstable keywords. General ebuild
cleanup for 4.0.6-r2 and 4.1.2-r1. Cleanup of init-scripts and patches. Fix
security bug #168196 and autotools handling bug #160037.
30 Mar 2007; Timothy Redaelli
courier-imap-4.1.2.ebuild:
Add ~x86-fbsd keyword
01 Mar 2007; Patrick McLean
+files/courier-imap-4.1.2-as-needed.patch, courier-imap-4.1.2.ebuild:
Add patch to fix compilation with -as-needed (bug #168769)
27 Feb 2007; Patrick McLean
+files/courier-imap-4.1.2-aclocal-fix.patch,
+files/courier-imap-4.1.2-db4-configure.in.patch,
courier-imap-4.1.2.ebuild:
Add patch to remove AC_PROG_SYSCONFTOOL from configure.in, move patch out of
-db4-configure.in.patch (fixes bug #168206).
25 Feb 2007; Patrick McLean
+files/courier-imap-4.0.6-db4-tcpd_configure.in.patch,
courier-imap-4.1.2.ebuild:
Restore ChangeLog to previous state before it was killed by blubb. Add patch
that was previously left out. fixes bug 168190.
*courier-imap-4.1.2 (23 Feb 2007)
23 Feb 2007; Patrick McLean
+courier-imap-4.1.2.ebuild:
Version bump, ebuild contributions by Hanno Meyer-Thurow
Conrad Kostecki
James Colannino
*courier-imap-4.0.6-r1 (03 Feb 2007)
03 Feb 2007; Simon Stelling
+files/courier-imap-4.0.6-r1-courier-imapd.indirect,
+files/courier-imap-4.0.6-r1-courier-imapd.rc6,
+files/courier-imap-4.0.6-r1-courier-imapd-ssl.rc6,
+files/courier-imap-4.0.6-r1-courier-pop3d.indirect,
+files/courier-imap-4.0.6-r1-courier-pop3d.rc6,
+files/courier-imap-4.0.6-r1-courier-pop3d-ssl.rc6,
+files/courier-imap-4.0.6-r1-gentoo-imapd.rc,
+files/courier-imap-4.0.6-r1-gentoo-imapd-ssl.rc,
+files/courier-imap-4.0.6-r1-gentoo-pop3d.rc,
+files/courier-imap-4.0.6-r1-gentoo-pop3d-ssl.rc,
+courier-imap-4.0.6-r1.ebuild:
fix bug 141775
05 Jan 2007; Diego Pettenò
courier-imap-3.0.7.ebuild, courier-imap-3.0.8.ebuild,
courier-imap-4.0.1.ebuild, courier-imap-4.0.1-r1.ebuild,
courier-imap-4.0.1-r2.ebuild, courier-imap-4.0.4.ebuild,
courier-imap-4.0.6.ebuild:
Remove gnuconfig_update usage, leave it to econf.
23 Nov 2006; Francesco Riosa
courier-imap-3.0.8.ebuild:
dev-db/mysql => virtual/mysql
28 Sep 2006; Robin H. Johnson
courier-imap-4.0.6.ebuild:
Bug #144651, fix spelling and typos.
15 Sep 2006; Robin H. Johnson
+files/courier-imap-4.0.6-db4-bdbobj_configure.in.patch,
+files/courier-imap-4.0.6-db4-configure.in.patch,
courier-imap-4.0.6.ebuild:
Fix bug #134943 - compile failure with newer versions of berkdb.
05 Sep 2006; Joshua Kinard
Marked stable on mips.
25 Aug 2006; Robin H. Johnson
courier-imap-4.0.4.ebuild, courier-imap-4.0.6.ebuild:
Add chown fixup to avoid some user weirdness of perms 600 on a directory.
18 Aug 2006; Tobias Scherbaum
courier-imap-4.0.4.ebuild:
ppc stable, bug #143830
18 Aug 2006; Joshua Jackson
Stable x86; bug #143830
17 Aug 2006; Simon Stelling
stable on amd64
17 Aug 2006; Fernando J. Pereda
courier-imap-4.0.4.ebuild:
Stable on alpha wrt bug #143830.
15 Aug 2006; Jason Wever
Stabgle on SPARC wrt bug #143830.
14 Aug 2006; Jeroen Roovers
Stable for HPPA (bug #143830).
14 Aug 2006; Brent Baude
Marking courier-imap-4.0.4 ppc64 wrt bug #143830
07 Aug 2006; Aron Griffis
Mark 4.0.4 stable on ia64
*courier-imap-4.0.6 (07 Aug 2006)
07 Aug 2006; Aron Griffis
+courier-imap-4.0.6.ebuild:
Bump to 4.0.6 (from 4.0.4)
15 Sep 2005; Aron Griffis
courier-imap-4.0.1-r2.ebuild:
Mark 4.0.1-r2 stable on alpha
25 Aug 2005; Aron Griffis
courier-imap-4.0.1-r2.ebuild:
stable on ia64
25 Aug 2005; Ilya A. Volynets-Evenbakh
courier-imap-3.0.8.ebuild:
stabilize alpha
12 Aug 2005; Diego Pettenò
courier-imap-4.0.4.ebuild:
Fix courier-authlib dependency to 0.57.
*courier-imap-4.0.4 (08 Aug 2005)
08 Aug 2005; Diego Pettenò
+files/courier-imap-4.0.4-courier-imapd.rc6,
+files/courier-imap-4.0.4-courier-imapd-ssl.rc6,
+files/courier-imap-4.0.4-courier-pop3d.rc6,
+files/courier-imap-4.0.4-courier-pop3d-ssl.rc6,
+courier-imap-4.0.4.ebuild:
Updated to 4.0.4, initd files updated for new baselayout,
17 Jun 2005; Michael Hanselmann
courier-imap-4.0.1.ebuild:
Stable on ppc.
*courier-imap-4.0.1-r2 (31 May 2005)
31 May 2005; Robin H. Johnson
+courier-imap-4.0.1-r2.ebuild:
Bug #79240, courier-imap should not provide files for /etc/pam.d/.
09 Apr 2005; Markus Rothe
courier-imap-4.0.1-r1.ebuild:
Stable on ppc64
07 Apr 2005; Simon Stelling
stable on amd64
03 Mar 2005; Ciaran McCreesh
courier-imap-3.0.7.ebuild, courier-imap-3.0.8.ebuild,
courier-imap-4.0.1-r1.ebuild, courier-imap-4.0.1.ebuild:
sys-apps/procps -> sys-process/procps
13 Feb 2005; Jason Wever
Stable on sparc.
*courier-imap-4.0.1-r1 (11 Feb 2005)
11 Feb 2005; Robin H. Johnson
+files/courier-imap-4.0.1-r1-courier-imapd.indirect,
+files/courier-imap-4.0.1-r1-courier-pop3d.indirect,
+files/courier-imap-4.0.1-r1-gentoo-imapd-ssl.rc,
+files/courier-imap-4.0.1-r1-gentoo-imapd.rc,
+files/courier-imap-4.0.1-r1-gentoo-pop3d-ssl.rc,
+files/courier-imap-4.0.1-r1-gentoo-pop3d.rc,
+courier-imap-4.0.1-r1.ebuild:
Bug #81540, implemented a workaround for upstream removing functionality
that is still widely used. For all users wanting to use relay-ctrl-allow,
remove it from your courier-authlib config, and put it in
/etc/courier-imap/{pop3d,imapd} as LOGINRUN="relay-ctrl-allow" at the end.
06 Feb 2005; Joshua Kinard
Marked stable on mips.
03 Feb 2005; Tuấn Văn
Stable on x86. This upgrade is non-trival. Please read:
http://www.courier-mta.org/imap/?INSTALL.html~upgrading
less /usr/share/doc/courier-imap-4.0.1/courier-imap-gentoo.readme.gz
and pay attention to postinstall messages.
16 Jan 2005; Guy Martin
Stable on hppa.
07 Jan 2005; Tuấn Văn
change lib --> $(get_libdir)
*courier-imap-4.0.1 (04 Jan 2005)
04 Jan 2005; Tuấn Văn
+courier-imap-4.0.1.ebuild:
errata release
04 Jan 2005; Tuan Van
change !virtual/imapd to !mail-mta/courier
04 Jan 2005; Tuan Van
turn off configure cache. it confuses the new configure script.
*courier-imap-4.0.0 (01 Jan 2005)
01 Jan 2005; Tuan Van
+files/courier-imap-4.0.0-courier-imapd-ssl.rc6,
+files/courier-imap-4.0.0-courier-imapd.rc6,
+files/courier-imap-4.0.0-courier-pop3d-ssl.rc6,
+files/courier-imap-4.0.0-courier-pop3d.rc6,
+files/courier-imap-4.0.0-db4-bdbobj_configure.in.patch,
+files/courier-imap-4.0.0-db4-configure.in.patch,
+files/courier-imap-4.0.0-disable-fam-configure.in.patch,
+files/courier-imap-4.0.0-gentoo-imapd-ssl.rc,
+files/courier-imap-4.0.0-gentoo-imapd.rc,
+files/courier-imap-4.0.0-gentoo-pop3d-ssl.rc,
+files/courier-imap-4.0.0-gentoo-pop3d.rc,
-files/courier-imap-4.0.0_rc1-courier-imapd-ssl.rc6,
-files/courier-imap-4.0.0_rc1-courier-imapd.rc6,
-files/courier-imap-4.0.0_rc1-courier-pop3d-ssl.rc6,
-files/courier-imap-4.0.0_rc1-courier-pop3d.rc6,
-files/courier-imap-4.0.0_rc1-db4-bdbobj_configure.in.patch,
-files/courier-imap-4.0.0_rc1-db4-configure.in.patch,
-files/courier-imap-4.0.0_rc1-disable-fam-configure.in.patch,
-files/courier-imap-4.0.0_rc1-gentoo-imapd-ssl.rc,
-files/courier-imap-4.0.0_rc1-gentoo-imapd.rc,
-files/courier-imap-4.0.0_rc1-gentoo-pop3d-ssl.rc,
-files/courier-imap-4.0.0_rc1-gentoo-pop3d.rc, +courier-imap-4.0.0.ebuild,
-courier-imap-4.0.0_rc1.ebuild:
New version release.
23 Dec 2004; Tuan Van
files/courier-imap-4.0.0_rc1-courier-imapd-ssl.rc6,
files/courier-imap-4.0.0_rc1-courier-imapd.rc6,
files/courier-imap-4.0.0_rc1-courier-pop3d-ssl.rc6,
files/courier-imap-4.0.0_rc1-courier-pop3d.rc6:
authdaemond --> courier-authlib
16 Dec 2004; Dylan Carlson
courier-imap-3.0.8.ebuild:
Stable on amd64.
*courier-imap-4.0.0_rc1 (11 Dec 2004)
11 Dec 2004; Tuan Van
-files/courier-imap-3.0.8.20041116-courier-imapd-ssl.rc6,
-files/courier-imap-3.0.8.20041116-courier-imapd.rc6,
-files/courier-imap-3.0.8.20041116-courier-pop3d-ssl.rc6,
-files/courier-imap-3.0.8.20041116-courier-pop3d.rc6,
-files/courier-imap-3.0.8.20041116-db4-bdbobj_configure.in.patch,
-files/courier-imap-3.0.8.20041116-db4-configure.in.patch,
-files/courier-imap-3.0.8.20041116-disable-fam-configure.in.patch,
-files/courier-imap-3.0.8.20041116-gentoo-imapd-ssl.rc,
-files/courier-imap-3.0.8.20041116-gentoo-imapd.rc,
-files/courier-imap-3.0.8.20041116-gentoo-pop3d-ssl.rc,
-files/courier-imap-3.0.8.20041116-gentoo-pop3d.rc,
+files/courier-imap-4.0.0_rc1-courier-imapd-ssl.rc6,
+files/courier-imap-4.0.0_rc1-courier-imapd.rc6,
+files/courier-imap-4.0.0_rc1-courier-pop3d-ssl.rc6,
+files/courier-imap-4.0.0_rc1-courier-pop3d.rc6,
+files/courier-imap-4.0.0_rc1-db4-bdbobj_configure.in.patch,
+files/courier-imap-4.0.0_rc1-db4-configure.in.patch,
+files/courier-imap-4.0.0_rc1-disable-fam-configure.in.patch,
+files/courier-imap-4.0.0_rc1-gentoo-imapd-ssl.rc,
+files/courier-imap-4.0.0_rc1-gentoo-imapd.rc,
+files/courier-imap-4.0.0_rc1-gentoo-pop3d-ssl.rc,
+files/courier-imap-4.0.0_rc1-gentoo-pop3d.rc,
+files/courier-imap-gentoo.readme, -courier-imap-3.0.8.20041116.ebuild,
+courier-imap-4.0.0_rc1.ebuild:
Release candidate.
29 Nov 2004; Andrej Kacian
courier-imap-3.0.8.ebuild:
app-admin/fam -> virtual/fam, for bug #67170.
27 Nov 2004; Philip Walls
courier-imap-3.0.8.20041116.ebuild:
Migrate to virtual/fam
*courier-imap-3.0.8.20041116 (18 Nov 2004)
18 Nov 2004; Tuan Van
+files/courier-imap-3.0.8.20041116-courier-imapd-ssl.rc6,
+files/courier-imap-3.0.8.20041116-courier-imapd.rc6,
+files/courier-imap-3.0.8.20041116-courier-pop3d-ssl.rc6,
+files/courier-imap-3.0.8.20041116-courier-pop3d.rc6,
+files/courier-imap-3.0.8.20041116-db4-bdbobj_configure.in.patch,
+files/courier-imap-3.0.8.20041116-db4-configure.in.patch,
+files/courier-imap-3.0.8.20041116-disable-fam-configure.in.patch,
+files/courier-imap-3.0.8.20041116-gentoo-imapd-ssl.rc,
+files/courier-imap-3.0.8.20041116-gentoo-imapd.rc,
+files/courier-imap-3.0.8.20041116-gentoo-pop3d-ssl.rc,
+files/courier-imap-3.0.8.20041116-gentoo-pop3d.rc,
+courier-imap-3.0.8.20041116.ebuild:
Commit for testing only. Do not use.
16 Nov 2004; Tuan Van
Add virtual/imapd blocking. Bug #55309.
16 Nov 2004; Robin H. Johnson
courier-imap-3.0.8.ebuild:
fix bug #69867.
07 Nov 2004; Jason Wever
Stable on sparc.
07 Nov 2004; Joshua Kinard
Marked stable on mips.
02 Nov 2004; Tuan Van
-files/authdaemond.rc6, -files/courier-imap-3.0.2-db40vs41.patch,
-files/courier-imap-3.0.2-disable-fam.diff,
-files/courier-imap-3.0.2-removerpm.patch, -files/courier-imapd-ssl.rc6,
-files/courier-pop3d-ssl.rc6, -files/gentoo-imapd-ssl.rc,
-files/gentoo-imapd.rc, -files/gentoo-pop3d-ssl.rc,
-files/gentoo-pop3d.rc, courier-imap-3.0.7.ebuild,
courier-imap-3.0.8.ebuild:
remove cruft. fix RDEPEND use? syntax error.
01 Nov 2004; Tuan Van
courier-imap-3.0.8.ebuild:
stable on x86.
*courier-imap-3.0.8 (22 Sep 2004)
22 Sep 2004; Tuan Van
+files/courier-imap-3.0.8-db4-bdbobj_configure.in.patch,
+files/courier-imap-3.0.8-db4-configure.in.patch,
+files/courier-imap-3.0.8-disable-fam-configure.in.patch,
+courier-imap-3.0.8.ebuild:
Version bump.
30 Aug 2004; Tom Gall
stable on ppc64, bug #61745
25 Aug 2004; Tuan Van
Stable on x86.
25 Aug 2004; Jason Wever
Stable on sparc wrt bug #60865.
25 Aug 2004; Danny van Dyk
Marked stable on amd64.
23 Aug 2004; Tuan Van
add dohtml, remove *.html from dodoc.
23 Aug 2004; Robin H. Johnson
courier-imap-3.0.7.ebuild:
Loosing the DB restriction now that we support DB4.
22 Aug 2004; Rajiv Aaron Manglani
courier-imap-3.0.7.ebuild:
fix up docs.
22 Aug 2004; Robin H. Johnson
files/authdaemond-3.0.4-r1:
bug #61254.
21 Aug 2004; Robin H. Johnson
courier-imap-3.0.7.ebuild:
Fix a bug for Rajiv.
20 Aug 2004; Guy Martin
Stable on hppa.
*courier-imap-3.0.7 (19 Aug 2004)
19 Aug 2004; Tuan Van
+files/courier-imap-3.0.7-db4-bdbobj_configure.in.patch,
+files/courier-imap-3.0.7-db4-configure.in.patch,
+files/courier-imap-3.0.7-disable-fam-configure.in.patch,
+courier-imap-3.0.7.ebuild:
Version bump. Add patches to support db4. Add gdbm USE flag back.
Add logic to default to gdbm if both 'berkdb' and 'gdmb' USE flags present.
20 Aug 2004; Danny van Dyk
Marked stable on amd64.
19 Aug 2004; Gustavo Zacarias
courier-imap-3.0.5.ebuild:
Stable on sparc wrt #60865
19 Aug 2004; Tuan Van
stable on x86. GLSA bug #60865.
05 Jul 2004; Robin H. Johnson
courier-imap-3.0.2-r1.ebuild, courier-imap-3.0.2.ebuild,
courier-imap-3.0.4-r1.ebuild, courier-imap-3.0.4.ebuild:
bug #55956, backport fix I put into 3.0.5 for gdbm vs. berkdb.
01 Jul 2004; Jeremy Huddleston
courier-imap-2.1.2-r2.ebuild, courier-imap-3.0.2-r1.ebuild,
courier-imap-3.0.2.ebuild, courier-imap-3.0.4-r1.ebuild,
courier-imap-3.0.4.ebuild, courier-imap-3.0.5.ebuild:
virtual/glibc -> virtual/libc
*courier-imap-3.0.5 (26 Jun 2004)
26 Jun 2004; Robin H. Johnson
courier-imap-3.0.4-r1.ebuild, courier-imap-3.0.5.ebuild,
files/authdaemond-3.0.4-r1, files/authdaemond.conf,
files/authdaemond.conf-3.0.4-r1, files/authdaemond.rc6,
files/courier-imapd-ssl.rc6, files/courier-imapd-ssl.rc6-3.0.5,
files/courier-imapd.rc6, files/courier-pop3d-ssl.rc6,
files/courier-pop3d-ssl.rc6-3.0.5, files/courier-pop3d.rc6,
files/gentoo-imapd-1.7.3-r1.rc, files/gentoo-imapd-ssl-1.7.3-r1.rc,
files/gentoo-pop3d-1.7.3-r1.rc, files/gentoo-pop3d-ssl-1.7.3-r1.rc:
fix bugs 42686, 52496, 39653, 52174, 52658, new upstream version.
17 Jun 2004; Robin H. Johnson
courier-imap-2.1.2-r1.ebuild:
Remove 2.1.2-r1 as per bug #54020.
10 Jun 2004; Aron Griffis
courier-imap-2.1.2-r1.ebuild, courier-imap-2.1.2-r2.ebuild,
courier-imap-3.0.2-r1.ebuild, courier-imap-3.0.2.ebuild,
courier-imap-3.0.4-r1.ebuild, courier-imap-3.0.4.ebuild:
Fix use invocation
28 May 2004; Robin H. Johnson
Update metadata.xml.
*courier-imap-3.0.4-r1 (19 May 2004)
19 May 2004; Robin H. Johnson
courier-imap-3.0.4-r1.ebuild, files/authdaemond-3.0.4-r1,
files/authdaemond.conf-3.0.4-r1:
bug #51306 again, authdaemond changes
*courier-imap-3.0.4 (17 May 2004)
17 May 2004; Robin H. Johnson
courier-imap-3.0.4.ebuild:
version bump, bug #51306. severe problem found in 3.0.2.
27 Apr 2004; Aron Griffis
courier-imap-2.1.2-r1.ebuild, courier-imap-2.1.2-r2.ebuild,
courier-imap-3.0.2-r1.ebuild, courier-imap-3.0.2.ebuild:
Add inherit eutils
26 Apr 2004; Aron Griffis
courier-imap-2.1.2-r1.ebuild, courier-imap-2.1.2-r2.ebuild,
courier-imap-3.0.2-r1.ebuild, courier-imap-3.0.2.ebuild:
Add die following econf for bug 48950
*courier-imap-3.0.2-r1 (23 Apr 2004)
23 Apr 2004; Robin H. Johnson
courier-imap-3.0.2-r1.ebuild, files/courier-imap-3.0.2-disable-fam.diff:
bug #48838, make it possible to disable fam properly, configure.in patch by
*courier-imap-2.1.2-r2 (19 Apr 2004)
19 Apr 2004; Robin H. Johnson
courier-imap-1.7.3-r1.ebuild, courier-imap-2.1.2-r2.ebuild:
remove 1.7.3-r1, add new revision of 2.1.2 with QA fixes for bug #48362
19 Apr 2004; Robin H. Johnson
courier-imap-3.0.2.ebuild:
fix bug #21330 a bit better
31 Mar 2004; Robin H. Johnson
files/courier-imapd-ssl.rc6, files/courier-imapd.rc6,
files/courier-pop3d-ssl.rc6, files/courier-pop3d.rc6:
avoid bug #46351 recurring by having init scripts use famd.
06 Apr 2004; Joshua Brindle
courier-imap-2.1.2-r1.ebuild, courier-imap-3.0.2.ebuild:
added selinux policy to rdepend
28 Mar 2004; Jochen Maes
courier-imap-3.0.2.ebuild
26 Mar 2004; Jason Wever
Marked stable on sparc wrt bug #45584.
26 Mar 2004; Jon Portnoy
courier-imap-3.0.2.ebuild :
Stable on AMD64
26 Mar 2004; Robin H. Johnson
courier-imap-3.0.2.ebuild:
clean up vpopmail and more in ebuild. bump to x86 for security bug #45584.
*courier-imap-3.0.2 (26 Mar 2004)
26 Mar 2004;
files/courier-imap-3.0.2-db40vs41.patch,
files/courier-imap-3.0.2-removerpm.patch:
courier-imap <3.0.0: Courier Multiple Remote Buffer Overflow Vulnerabilities.
bug #45584
10 Mar 2004; Daniel Ahlberg
files/courier-imap-2.1.2-res_query.patch:
Add patch for res_query to allow courier-imap to compile on amd64. Should close #41160.
22 Feb 2004; Aron Griffis
courier-imap-1.7.3-r1.ebuild, courier-imap-2.1.2-r1.ebuild:
Remove arm keywords
28 Jan 2004; Jon Portnoy
AMD64 keywords.
18 Jan 2004; Robin H. Johnson
courier-imap-2.1.2-r1.ebuild:
fix bug #38606.
08 Jan 2004; Jason Wever
Added ~sparc keyword.
22 Dec 2003; Robin H. Johnson
courier-imap-2.1.2-r1.ebuild:
fix bug #33346
09 Dec 2003; Martin Holzer
courier-imap-1.7.3-r1.ebuild, courier-imap-2.1.2-r1.ebuild:
adding RESTRICT="nomirror"
07 Dec 2003; foser
Fix fam-oss dep to fam, due to move
14 Nov 2003; Rajiv Aaron Manglani
courier-imap-1.7.3-r1.ebuild:
marked stable on ppc.
31 Oct 2003; Robin H. Johnson
courier-imap-2.1.2-r1.ebuild:
fix bug #32410, bump to stable
28 Oct 2003; Robin H. Johnson
courier-imap-2.1.2-r1.ebuild, files/courier-imap-2.1.2-removerpm.patch:
commit brandy's patch for bug #28070
*courier-imap-2.1.2-r1 (02 Oct 2003)
02 Oct 2003; Robin H. Johnson
courier-imap-2.1.2-r1.ebuild:
add fam support - bug #29879
*courier-imap-2.1.2 (25 Sep 2003)
25 Sep 2003; Robin H. Johnson
courier-imap-2.1.2.ebuild:
version bump
03 Sep 2003; Robin H. Johnson
courier-imap-2.1.1.ebuild:
add fix for bug #27528, and add a few comments about the last fix too
03 Sep 2003; Robin H. Johnson
courier-imap-2.1.1.ebuild, files/courier-imap-2.1.1-db40vs41.patch:
apply Brandy's patch for bug #27517
*courier-imap-2.1.1 (28 Aug 2003)
28 Aug 2003; Robin H. Johnson
courier-imap-2.1.1.ebuild:
version bump, fix ipv6 bug, another attempted tcltk fix
*courier-imap-2.0.0 (31 Jul 2003)
31 Jul 2003; Robin Hugh Johnson
Bump to latest stable upstream version, new fix for userpriv
*courier-imap-1.7.3-r1 (31 Jul 2003)
31 Jul 2003; Robin Hugh Johnson
files/gentoo-imapd-1.7.3-r1.rc, files/gentoo-imapd-ssl-1.7.3-r1.rc,
files/gentoo-pop3d-1.7.3-r1.rc, files/gentoo-pop3d-ssl-1.7.3-r1.rc:
Fixed Prerun support again, bump to x86.
10 Jun 2003;
courier-imap-1.7.2.ebuild, courier-imap-1.7.3.ebuild:
DEPEND on sed >= 4
*courier-imap-1.7.3 (20 May 2003)
27 May 2003; Robin Johnson
Fix bug #21803
25 May 2003; Robin Johnson
Fix bug #21577
20 May 2003; Robin Johnson
Version bump and move warning message. Removed extraneous cflag filtering.
Fixed bug #21330 as well.
*courier-imap-1.7.2 (19 May 2003)
19 May 2003; Robin Johnson
files/gentoo-imapd-ssl.rc, files/gentoo-imapd.rc, files/gentoo-pop3d-ssl.rc,
files/gentoo-pop3d.rc:
Version bump. Fixed DB3/DB4 stuff properly (minor bug in sed-foo). Install
all auth modules. Added prerun support for some other mail stuff. Fix
SRC_URI. Fix Vpopmail support. Other misc cleanups.
*courier-imap-1.7.1 (30 Apr 2003)
30 Apr 2003; Alastair Tse
version bump. workaround db3/db4 coexisting problems. added
/var/lib/courier-imap
18 Feb 2003; Nick Hadaway
Updated gentoo-*.rc with fix0rs found by Psi-Jack!
*courier-imap-1.7.0 (01 Feb 2003)
11 Apr 2003; Alastair Tse
deps now reflect that it needs db3 and nothing else. fixes #18734.
04 Feb 2003; Nick Hadaway
Updated vpopmail detection to account for a different home directory
for vpopmail.
01 Feb 2003; Nick Hadaway
files/digest-courier-imap-1.7.0 :
Version bump. Includes some postgres changes and other fixes.
*courier-imap-1.6.2-r1 (29 Jan 2003)
29 Jan 2003; Nick Hadaway
files/digest-courier-imap-1.6.2-r1 :
Now filtering -funroll-loops and -fomit-frame-pointer like in the
courier ebuild.
*courier-imap-1.6.2 (31 Dec 2002)
14 Jan 2003; Nick Hadaway
Tamed down the postgres dependancy.
09 Jan 2002; Nick Hadaway
Marked stable for x86.
31 Dec 2002; Nick Hadaway
files/digest-courier-imap-1.6.2 :
Version bump. new ebuild logic for unicode support. Added postgres
use variable support.
*courier-imap-1.6.1 (12 Dec 2002)
25 Dec 2002; Nick Hadaway
files/gentoo-imapd-1.6.1.rc, files/gentoo-imapd-ssl-1.6.1.rc,
files/gentoo-pop3d-1.6.1.rc, files/gentoo-pop3d-ssl-1.6.1.rc :
Updated the gentoo rc files and ebuild as logger has changed
to courierlogger.
12 Dec 2002; Nick Hadaway
courier-imap-1.6.1.ebuild, files/digest-courier-imap-1.6.1 :
Version bump. Added a test for vpopmail so proper configure options
are passed.
06 Dec 2002; Rodney Rees
*courier-imap-1.5.3 (25 Sep 2002)
25 Sep 2002; Nick Hadaway
courier-imap-1.5.3.ebuild, files/digest-courier-imap-1.5.3 :
Version bump. Lots of SSL fixes.
*courier-imap-1.5.1 (03 Aug 2002)
11 Sep 2002; Nick Hadaway
courier-imap-1.5.1.ebuild, files/authdaemond.conf,
files/authdaemond.rc6 :
Updated authenticator choosing mechanism. Removed pgsql authenticator
as it is not a supported backend.
30 Aug 2002; Sascha Schwabbauer
Added ppc to keywords.
03 Aug 2002; Nick Hadaway
courier-imap-1.5.1.ebuild, files/digest-courier-imap-1.5.1 :
Version bump. Added support for unicode searching, and proper
listening to the ipv6 use variable.
*courier-imap-1.5.0 (24 Jun 2002)
22 Jul 2002; Nick Hadaway
Fixed small typo. changed pqsql to pgsql. Closes bug #5163.
26 Jul 2002; Nicholas Jones
the user exists, then all the files MUST exist.
24 Jun 2002; Donny Davies
Chase latest release.
*courier-imap-1.4.5-r3 (20 Jun 2002)
20 Jun 2002; Kyle Manna
Moved maildirmake for /usr/sbin to /usr/bin, close bug #3844
*courier-imap-1.4.5-r2 (14 Jun 2002)
14 Jun 2002; Kyle Manna
Forgot to install /etc/init.d/authdaemond
*courier-imap-1.4.5-r1 (8 Jun 2002)
8 Jun 2002; Kyle Manna
Added pop3 init scripts.
*courier-imap-1.4.3-r1 (30 Apr 2002)
30 Apr 2002; Donny Davies
Added tcltk? ( >=dev-tcltk/expect-5.33.0 ) to RDEPEND, closing #2282.
*courier-imap-1.4.3 (1 Apr 2002)
1 Apr 2002; Donny Davies
Updated to latest release. Added --enable-workarounds-for-imap-client-bugs
to ./configure which helps some clients; notably Netscape Messenger. Now
installs a pam_stack aware pam.d/ file.
*courier-imap-1.4.1-r4 (14 Mar 2002)
14 Mar 2002; Grant Goodyear
Fixed bug where /etc/courier-imap/pop3d didn't have MAILDIR=.maildir set.
*courier-imap-1.4.1-r2 (21 Feb 2002)
21 Feb 2002; Grant Goodyear
Modified the ebuild so that /usr/sbin/{imapd,pop3d} get renamed to
/usr/sbin/{courier-imapd,courier-pop3d}. I also had to change hack
the /usr/lib/courier-imap/*.rc files to call these newly-named functions.
While I was at it I cleaned up the ebuilds and fixed the not-yet-caught
bug that pop3d was still trying to use Maildir instead of ${MAILDIR}.
Fixes bug #584.
*courier-imap-1.4.1-r1 (1 Feb 2002)
1 Feb 2002; G.Bevin
Added initial ChangeLog which should be updated whenever the package is
updated in any way. This changelog is targetted to users. This means that the
comments should well explained and written in clean English. The details about
writing correct changelogs are explained in the skel.ChangeLog file which you
can find in the root directory of the portage repository.
AUX authdaemond-3.0.4-r1 1062 RMD160 5e9184dc8c8ccbb528252c0795b5cd62b1d1b9c8 SHA1 55180242453ee47c951d265615da7a0902a5dc1f SHA256 2731b87fec98ae4ecdb5cfdb5917894e28eaf768f68555462d801c116cfa2a0d
AUX authdaemond.conf-3.0.4-r1 544 RMD160 52c3d3ec3c720ef36d03b531e9f4408149769d19 SHA1 f433ce39a182b7e2d7c91d22c59546e5fc552d83 SHA256 6bbf884df95152b5f8e1b0cd404a1833c1e337ccd44360156296122d2c9bb72f
AUX courier-imap-3.0.8-db4-bdbobj_configure.in.patch 1263 RMD160 3f5c2a5f4818a138e3fe118d790ceb1fb6b4aff4 SHA1 72cc2d43835efe8833ece60602ebd839d5480729 SHA256 e33f23799ffb934b083512c9cc58f81803610123f4ad38fda800431f0d67fa73
AUX courier-imap-3.0.8-db4-configure.in.patch 1337 RMD160 61f09bd94189576acc3b41a5aee9605d1f0c95de SHA1 e06ef1f954e0c0deaabe548abe559525d2fe918a SHA256 5f749b10f53d3a631af65f3766f3d72e54603761b164a2a656a59aee78c67939
AUX courier-imap-3.0.8-disable-fam-configure.in.patch 654 RMD160 c43ae28da398b0106efd73924a0b2c9f4490b799 SHA1 5c00b1d4180c65b1c6feed3979b60b018f874996 SHA256 775dab159b4e05141e4d8fdfa5df75967dda8a8f60e4e962208f724a497d3f54
AUX courier-imap-4.0.1-courier-imapd-ssl.rc6 1215 RMD160 895e04e9d0fc49fa5e2a022b070c09e31706918b SHA1 55e6a427c1acae17853fe016dc38068a9f3456b6 SHA256 7724a4e51effba581872917244a56d165506a813a923c4126323d93985ea5c2f
AUX courier-imap-4.0.1-courier-imapd.rc6 970 RMD160 cc29497750a0d4c1f09a8dde111b3e387bf902bd SHA1 34f0bf3456ad6d33280216940807cf5805214cd6 SHA256 adde0c60fb7d66253c791197631281efb57975cb130b7e70925cac03a1085d5a
AUX courier-imap-4.0.1-courier-pop3d-ssl.rc6 1223 RMD160 ce2d8a86fb20da03d9a3b085032cc1c68d48b3b9 SHA1 021a3b52493dfd1c97614a31f1015ad947a58e9b SHA256 ecb4258a140359940637f84c1457c885e57aa0f45a6b5c3247db4d413219680f
AUX courier-imap-4.0.1-courier-pop3d.rc6 978 RMD160 fbcc8eaaa0c68e29beaa83236d165ed489a0eea7 SHA1 b66127eab29e9e0a44469a5e2aebe1582518b3d0 SHA256 a66aa6fd10ab8d43bc28357b1c9db63afb80e6c66b8fa47fa26214c40cf1bcf7
AUX courier-imap-4.0.1-db4-bdbobj_configure.in.patch 1263 RMD160 3f5c2a5f4818a138e3fe118d790ceb1fb6b4aff4 SHA1 72cc2d43835efe8833ece60602ebd839d5480729 SHA256 e33f23799ffb934b083512c9cc58f81803610123f4ad38fda800431f0d67fa73
AUX courier-imap-4.0.1-db4-configure.in.patch 1303 RMD160 69228d5d2fb61bf176581c22a0a02e795342595e SHA1 75e73e48fb91c22996bdbd6417d30a6698a96309 SHA256 f7d626d03e6a83a6851be1ec7b1ad8b24e26d20fa1a2cf87ebce4560c226c2c3
AUX courier-imap-4.0.1-disable-fam-configure.in.patch 654 RMD160 c43ae28da398b0106efd73924a0b2c9f4490b799 SHA1 5c00b1d4180c65b1c6feed3979b60b018f874996 SHA256 775dab159b4e05141e4d8fdfa5df75967dda8a8f60e4e962208f724a497d3f54
AUX courier-imap-4.0.1-gentoo-imapd-ssl.rc 1092 RMD160 d32cbf015f9fda6bbeee1bfa054c39a08ccead95 SHA1 9f5ad90b96a40c0cd3d910e5390d7f648c2c0046 SHA256 1feabc5a11925e8a9abef29b3797b6f8ee6c9935f726e4a9af918f2f9879b797
AUX courier-imap-4.0.1-gentoo-imapd.rc 1129 RMD160 db3c0dfea4074482144fca2195acbbc18a9b395b SHA1 6b0966aeace6d643c63e902443cf782ad5c81422 SHA256 0814d73c7eb1cd857288390b3e8206fa8037bccb2d17c4998e18d351da87fcf7
AUX courier-imap-4.0.1-gentoo-pop3d-ssl.rc 1067 RMD160 a33364035b91a371da9e0b7a6cd1f8af075edcd9 SHA1 df93bd12d2afeafc6576d67a0d945827e791c298 SHA256 7ffa8c0a0788ad70332c5351aebf58be715b8ed6f7ace887c3163b4b4282d397
AUX courier-imap-4.0.1-gentoo-pop3d.rc 1075 RMD160 8cc119405c18525fbc3bed9a5ea1be3ac3cb02b8 SHA1 cf79243fbf860c0082b39df9ba16d726b198ccf6 SHA256 a81f912ff7542f6cb3fee162a75a045606b5f1175264a0b5b303a9d5c1c4a1d1
AUX courier-imap-4.0.1-r1-courier-imapd.indirect 85 RMD160 3b6790ccee0c7271c23f76a393b9d0a0d0b575ef SHA1 807e2294f80b95f0bae856a64774ffed7175dbef SHA256 96f7cd8cb1f4817be039df630b0e5da3838530955881b7217527307514b1b8a3
AUX courier-imap-4.0.1-r1-courier-pop3d.indirect 85 RMD160 f0750ff2a958b9a24112c9352bdc6a70b4a077f4 SHA1 6b7859075554104f0fe04f1e74fde2565a77e65d SHA256 df03082133b598631c4e47b5f448bba385f5993c0bd55a4eca9637b8176d8593
AUX courier-imap-4.0.1-r1-gentoo-imapd-ssl.rc 1114 RMD160 c68bdfd5e7d73a0977db02833fad84efa4697419 SHA1 9ced6a64c1c7f8e0843f8e63c36f057ab6ed1ef3 SHA256 d632673bb34aa049205682d7c26c4972623589bbcace6604bf6c81a91d02d30d
AUX courier-imap-4.0.1-r1-gentoo-imapd.rc 1151 RMD160 c0e1c3402382b62210a4855e1fe5239bcce3e06a SHA1 087ca38c92d82c3cf6a94aa2c97368415a28b72e SHA256 c9929c008990b5e4602f2b9e2654875c25f5cc776e1d0c433f16c716a327afa6
AUX courier-imap-4.0.1-r1-gentoo-pop3d-ssl.rc 1089 RMD160 1b0339c606987f6c230d7b7e962a098c01bba0e3 SHA1 4cb7a81534d19f45c065b41139ee66a51ff64c61 SHA256 ce0ce1e14324ce8d6633aad60762b4bcc7dc79a94047b6aa45a670b4e897393e
AUX courier-imap-4.0.1-r1-gentoo-pop3d.rc 1097 RMD160 d138103cf9fd92ebc7806593eb79b22a4aea4d50 SHA1 d2d7e885e37e8d4510f440ab3e94593ce02eef86 SHA256 6e7fd5f98e40504c0da0236bdfeadad33cf95cc8dfe31af8207d23620f27b84d
AUX courier-imap-4.0.4-courier-imapd-ssl.rc6 1174 RMD160 a7e9593106447b743cc8dc153664869924a152a2 SHA1 984c4e7324e890290c3ae793f9afdf855991a205 SHA256 ef3d363558c64dcb3b6429de700eb4bc1557c622dbfad2e26abe98f59c18329f
AUX courier-imap-4.0.4-courier-imapd.rc6 929 RMD160 4aec3c1c2fd1e32ff8fc89bc4d89b7b1227cda57 SHA1 bb919257cdd11f66bf448db86539d784ca539ccf SHA256 5187c9dbaaeceb98273e719b676fe7197bcfa215dfdf05c9d8cb161af48e3146
AUX courier-imap-4.0.4-courier-pop3d-ssl.rc6 1182 RMD160 61a232d9de309f8a79c9ee05a412afc3265f0b21 SHA1 e337b7ba969462e896c595b205eb1b15d2860a5e SHA256 bc1e61890624d9ecc930d33785879b6d22bea6ac962be5f2aad1529a024c88f3
AUX courier-imap-4.0.4-courier-pop3d.rc6 937 RMD160 aa08726aefd6fd3dad6cf2003de853869eb2d71a SHA1 2728ecebabcb5210c6d7f985df777b14a1edc5d3 SHA256 70c526347c8c53888df1bc6602d242376e9ef885a2b125d5292363c082dc4fca
AUX courier-imap-4.0.6-aclocal-fix.patch 237 RMD160 005a1b1bcff427b747b5fdae0fbe678367e7ebfa SHA1 9593c438e8b6be719d1685f5398659bb841f115b SHA256 2bc930268fd9c1565f2dfc341557de4a6e4f867131b279d52d47d285e5f62579
AUX courier-imap-4.0.6-db4-bdbobj_configure.in.patch 1558 RMD160 ae5866697c98a760e11927faa69687b942795ff3 SHA1 e6fd4defb33644d806679e00f2eb056e7f72170e SHA256 208e443f2730237ee8ae858eb21c3895c83651fbaacda881bdf46076b5182db7
AUX courier-imap-4.0.6-db4-configure.in.patch 1497 RMD160 77a9ad984789ab56c5d91d8b276b5c34a0e3b909 SHA1 349ad8d16c05ba0c7a7231b092286f48fecca54b SHA256 53db1d9b267e2d753ca6e27149008b5f92e11ddea7260f44c616b7cc3327d67c
AUX courier-imap-4.0.6-db4-tcpd_configure.in.patch 264 RMD160 49e1deaa1d006b1f3bd8d68ebad037fd934d3d06 SHA1 836208b414a72cf426a17e27f4c6dcf3c88138f3 SHA256 553b9b20afad380b2901318b6b2152b14c1f26ed3bfe26126364284f143cdd21
AUX courier-imap-4.0.6-r1-courier-imapd-ssl.rc6 1200 RMD160 cfe0a24af1c4ca8ae1bbeafb25612a790961fd68 SHA1 77363438726d1e2fd7b9afb11b6bd2223fd75775 SHA256 c417f5de1bf2eeb5a7918931c30f1902d9f463279d8aa73ea0e13623923805df
AUX courier-imap-4.0.6-r1-courier-imapd.indirect 81 RMD160 4b495046094a71b18ea17881f59a03fe295a352c SHA1 4b9fb37409877249e2c2cfb8f285d955dd260005 SHA256 390c2c215fc7a39f74b41a4c16372489e3c084a35e8e3ed66bc4548a766fa47d
AUX courier-imap-4.0.6-r1-courier-imapd.rc6 949 RMD160 484cdac2b40e6f8dbad3a604a8ab2d3967226952 SHA1 562a624818140ed324cdaf2cb7d3541f7b5a48f7 SHA256 67406394a81a4ca697b8d08e987a0680b4e7622ac30ea009241b002f1d3adc8e
AUX courier-imap-4.0.6-r1-courier-pop3d-ssl.rc6 1208 RMD160 8a997b6299c6a3de6dcd3e4b2d7c5171286e466a SHA1 0e007a0a8964e2c0523f187b0aed291008d70c2b SHA256 dec6250978b39b6dd1bfbea0b0dbd108ca60171db04135dff66c5ae73a7a33e6
AUX courier-imap-4.0.6-r1-courier-pop3d.indirect 81 RMD160 0e144bab4674e4330ba18fa18ecc9b9a8efe4803 SHA1 aea5c225b07eaefb5ac0bf9207cdda12e804640a SHA256 55a49859df2eb85f7ade803f0aa42291ff54047c2e7475ae5598da05943b0dbc
AUX courier-imap-4.0.6-r1-courier-pop3d.rc6 957 RMD160 d1502bbce31fc6a26cb3adf073abfe2b91bf29f3 SHA1 8db1f39de8d4041c96be3a5c04c6ecb763c6b00f SHA256 f3c8996471543ca35a9d4af6f2a7e5bc4fc5c9820dcc461792231236fababa69
AUX courier-imap-4.0.6-r1-gentoo-imapd-ssl.rc 984 RMD160 93671fcb0eb2660ef41edf9ffc404c864bc369b7 SHA1 fc0c25e11555384db3fb7756a4c6b78d9c8c8e7e SHA256 dd79242bddbd46f7eabbd99da612c4189bbc998e3680bf9d50f6788783ba820e
AUX courier-imap-4.0.6-r1-gentoo-imapd.rc 1026 RMD160 1bd16e446e10da64352390803cbaa691c11ecc68 SHA1 b8eb095bb6c8b6c970dd60e944ebfd2f36a39b40 SHA256 a54e674a8bfce99cda974e5c2e9bd818440256130f018f1c3412ea29f4e618f1
AUX courier-imap-4.0.6-r1-gentoo-pop3d-ssl.rc 957 RMD160 7dcbfe1e550601ebdd973394ff03f19701425254 SHA1 d5bc5e06275d4082ab9b76c739d9da491a08cafd SHA256 977ddb360fe8a4a2baab932895c1d871b992d33d2837d97af23d7a97f66dc6a6
AUX courier-imap-4.0.6-r1-gentoo-pop3d.rc 999 RMD160 10028f0deafad4b31b12e4006ace1a007b542495 SHA1 5db7530c017c1e0a4cdb02a67bc5256f9b790110 SHA256 e9ec918c6a9f1ac3ad952d7c15392ab73f0a2e6a27f4f8a1f3fe3902c67ea278
AUX courier-imap-4.1.2-as-needed.patch 398 RMD160 0cda873874a9261cd0f640703fdb0c7cfb79e044 SHA1 53ab7b464ed0daf167066c323827524a653964e0 SHA256 8d1185d1929ab1cce5216f188adeb66a52ede20fbcb95b45d9b7a39287f884e3
AUX courier-imap-gentoo.readme 2827 RMD160 1429340ccc518b019a42dd274a7c15f01f125d25 SHA1 72c4f79c6ed08c4423925b05303f97287b8d95d1 SHA256 fbfe0396d87bcfe2722df94b2c68ef1a1993edcf776c8572604aed0390e4061f
AUX courier-imapd-ssl.rc6-3.0.5 1196 RMD160 b3d21018f32d59c8db09491aa5d25e99ef5022ca SHA1 b25b6d29cba405ba7ea96223d564178f7cce8ece SHA256 818217507f3d27aebf9f14fa10a9eb9805b605c5bacc7a936e8610127816fd76
AUX courier-imapd.rc6 945 RMD160 1446c5fdc95aceeebfb670e501d2f6d0f8e15c5b SHA1 77f36e56631db5be6f51377386a6059e9f48244f SHA256 37d2d245f58dbfeca4f6c15f3dffbb652daaae18ba07973989f661ce00f23178
AUX courier-pop3d-ssl.rc6-3.0.5 1204 RMD160 c1638bd94fadc331cc97cc54462c9d9ed8fbd986 SHA1 7c1956c410179881430be2580561f6ea6c6fd5c2 SHA256 4a107d764d17ec217ecaeaa57504bb893558b0bc8fa5e82af33a3c63771d60a4
AUX courier-pop3d.rc6 953 RMD160 c98bce7aabef2e138febf10e4c8bab86026216d4 SHA1 0aa6898254e70b0f2f13b9b3cc68e9895f9d4a3b SHA256 e64d98087123a432b528a301bb5a4f1d6ef6232a39c981318f8159297f775f76
AUX gentoo-imapd-1.7.3-r1.rc 1074 RMD160 0fec4a1dc289b348e0605152467e603a2674847a SHA1 5eae59350ef88024041cad7bb8b4e7c79ea03b43 SHA256 52ad1bb47496be6fdd5a943cc5d156e18f4429c7b3f9d4d89670d451023db9e7
AUX gentoo-imapd-ssl-1.7.3-r1.rc 1036 RMD160 441ee24be1825ab8cfb485cad5df329a1aa008fa SHA1 7791e6fc38cce038562b8dee868ec83c6e06a5c1 SHA256 2430819bae8e265934ac31944534ef8e3ab94dfe0e59a3ea658f60ebdd7d989b
AUX gentoo-pop3d-1.7.3-r1.rc 1020 RMD160 e0c83f2cf3507cd8b08dd53f47abe3dcbeb10c8a SHA1 bab1db4ee5f31e33c8ca81ebab7cd46e93a908bc SHA256 189dca5b4fa90405e25f7d659b984c10a705d6c9a725f0571bc37d784793911b
AUX gentoo-pop3d-ssl-1.7.3-r1.rc 1012 RMD160 d967c3996f95e113e7e6f9dd0a62b418c37d6ee4 SHA1 b8cfb3069000e2a70e0aa836b231fa40bdeef6c7 SHA256 12659fbc648e66ccfd5b62f75a9cc4a580f56b35ddb02f1460b6ce2726050e0d
AUX mkimapdcert 996 RMD160 4ca3c600dc558f14648f318007447318a5e45165 SHA1 a1259ae6a18d4c2b2d783da72b730437fe0ffc2f SHA256 1ebd9ae44e3ca5fb906f5f399abec7d6f117d231db5725be0a1c4e043eaec4f6
AUX mkpop3dcert 996 RMD160 424c61ae95914f267397a1180dcb8fee64586ea3 SHA1 28f43f0f62999105fe37b6a2edd5a0cbf8cee157 SHA256 c241ccca359b5d126dc56fc73f21991d8a7bffb5c211d8b0a1e4e88e693eb7cb
DIST courier-imap-3.0.8.tar.bz2 1713447 RMD160 f3637ff037c4c372ab0cc5d13c34a7e71beeb27c SHA1 eca0a53a69b7efaa3850d1556f40ca7f95a8d280 SHA256 e447f0c0ee5f5ccd25a934658256465f52e39049c858f5d849b2f93f2e55c1d2
DIST courier-imap-4.0.1.tar.bz2 3032350 RMD160 3c22688f51165132f101bff2f77900976fcb40a3 SHA1 747c122c7b7f033ff9f9ab5ba3e4b689aa5d4189 SHA256 510f3d8d9542c103d38fb023e378811e35e109bf5443f5fc885d167a779911bf
DIST courier-imap-4.0.4.tar.bz2 3156707 RMD160 438559fe800ca47fb2d1cf5c3c3605964bab4cb1 SHA1 101f9d7868842e3cbc700cf7ac32ae32f0ef512b SHA256 21a6bf6228d08c28786e42057e3fbf7e11fa8ad66305cb02be82a5160a78e7c1
DIST courier-imap-4.0.6.tar.bz2 3157577 RMD160 4006c5ec4db6b2adac393e2ebdf9ee99af3a8b2a SHA1 d7fee884cc0015586459c511dbe03bc2a8466c7f SHA256 27e6847507ddecfab1672fdf52447f8351f4cf046145974768ea93ebfea6ddbb
DIST courier-imap-4.1.2.tar.bz2 3257311 RMD160 56546e90fc16f92daab6d7540154bc5f7ad06e27 SHA1 73ed09528f440ef07ba98f59a83172f4f6f4106b SHA256 37c3530b31e0b9b5a5bcd639ac3db4862f12e77ec39d8d67f19e630d76853d71
EBUILD courier-imap-3.0.8.ebuild 9393 RMD160 8e95036306b312101f3f55480637e2bc99fc9763 SHA1 5e3a49303aa0cee19403dbcd24526ea0185328db SHA256 a3f60ecefe46da7390376d3225633dfa727fe9295809fdff68cf5a000bc56f49
EBUILD courier-imap-4.0.1-r1.ebuild 10410 RMD160 cc48826c384e7cfe40ecf64d1debffa8b9264276 SHA1 1bb5931e33f2c9cde50b9ee41e34e85b56f0097f SHA256 2abe9eebf66c18270ea47346a252a0f617067ef9e94b87e9e63e089b3a0c7929
EBUILD courier-imap-4.0.1-r2.ebuild 10513 RMD160 d9d129a6e065d863fd6379079caf5022a3b1109a SHA1 fdc540c375332324fec2e035072fd3a1d8f3eb6a SHA256 0ed1bc000bc34d63e3647180fcbe1d424755318bd178ba33f06baae54c0dd715
EBUILD courier-imap-4.0.1.ebuild 10127 RMD160 27f7cca7ac2df0312532d783578c624b20783b24 SHA1 9df332f7dd19f1b90c70eb1b48e54916f9da01f0 SHA256 e81d23eaeaf853d92d7195147ade48e467cb91277d7361462d09d1068854de10
EBUILD courier-imap-4.0.4.ebuild 10136 RMD160 f7fb11b8bfef0a1d3fbb99e54bbd3b8e1987b8ad SHA1 b9300e604b65a4c9cb2f6e704f5424e4f514567f SHA256 d11814ed0cd7de7b2032c270a88f504729f733d32b70a0becda0529b88a0c88c
EBUILD courier-imap-4.0.6-r2.ebuild 8497 RMD160 6e733cdd5c173b75676c27c7b17afac8a9866644 SHA1 4551c08b0279b69bd53037b5e7d9ccce842eeb05 SHA256 1f469ced21f1b52e4075c128b7a165a229df11a2bd80eee15550ce822501949d
EBUILD courier-imap-4.1.2-r1.ebuild 8620 RMD160 40bbc20ffd238606fee0e4f4931ff501c143c5d6 SHA1 9416a5b212c613a0954074ea4f00253e1cc7b8b4 SHA256 6e5458805e044f508c070d09c7cdbe2f2e21e381652104eb7b80f16f697cb1b3
MISC ChangeLog 31675 RMD160 718889b031c8b73e6a61a1da106119c1dbab0926 SHA1 457d24ba4be495435db55c3fcc480dd190c5d556 SHA256 bbeb6ad1785c62a796ce4c133a3f38bd70aa7b308ffb23a932ff624c246b15f8
MISC metadata.xml 259 RMD160 772ff54163f1dca9ac7c718f2a5f10dc0ad02da5 SHA1 de85f156ac6360b05328c267c1f400e607ff3e95 SHA256 96a8c14d29e24a07a9cf1f5d84dae6332039444fdcc3ae99a22f8b017473bbc2
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/courier-imap-3.0.8.ebuild,v 1.27 2008/05/21 18:57:42 dev-zero Exp $
inherit eutils
DESCRIPTION="An IMAP daemon designed specifically for maildirs"
HOMEPAGE="http://www.courier-mta.org/"
SRC_URI="mirror://sourceforge/courier/${P}.tar.bz2"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="alpha amd64 arm hppa ia64 ~mips ~ppc ~ppc64 s390 sparc x86"
IUSE="fam berkdb gdbm debug ipv6 ldap mysql nls pam postgres selinux"
#userpriv breaks linking against vpopmail
RESTRICT="userpriv"
RDEPEND="virtual/libc
>=dev-libs/openssl-0.9.6
pam? ( >=sys-libs/pam-0.75 )
berkdb? ( sys-libs/db )
gdbm? ( >=sys-libs/gdbm-1.8.0 )
mysql? ( virtual/mysql )
ldap? ( >=net-nds/openldap-1.2.11 )
postgres? ( >=virtual/postgresql-server-7.2 )
>=dev-tcltk/expect-5.33.0
fam? ( virtual/fam )
selinux? ( sec-policy/selinux-courier-imap )"
DEPEND="${RDEPEND}
>=sys-apps/sed-4
dev-lang/perl
sys-process/procps
!mail-mta/courier"
RDEPEND="${RDEPEND}
!virtual/imapd"
PROVIDE="virtual/imapd"
pkg_setup() {
if ! use berkdb && ! use gdbm; then
echo
eerror "either 'berkdb' or 'gdbm' USE flag is required."
eerror "please add it to '/etc/make.conf' or '/etc/portage/package.use'"
eerror "'man 5 portage' for correct syntax usage for '/etc/postage/package.use'"
echo
die "required USE flag is missing."
fi
}
vpopmail_setup() {
VPOPMAIL_INSTALLED=
VPOPMAIL_DIR=
export VPOPMAIL_INSTALLED VPOPMAIL_DIR
VPOPMAIL_DIR=`grep ^vpopmail /etc/passwd 2>/dev/null | cut -d: -f6`
VPOPMAIL_INSTALLED=
if has_version 'net-mail/vpopmail' && [ -n "${VPOPMAIL_DIR}" ] && [ -f "${VPOPMAIL_DIR}/etc/lib_deps" ]; then
VPOPMAIL_INSTALLED=1
else
VPOPMAIL_DIR=
fi
}
src_unpack() {
unpack ${A}
cd ${S}
# bug #48838. Patch to enable/disable FAM support.
# 20 Aug 2004; langthang@gentoo.org.
# This new patch should fix bug #51540. fam USE flag is not needed for shared folder support.
epatch ${FILESDIR}/${P}-disable-fam-configure.in.patch || die "patch failed"
# These patches should fix problem detecting Berkeley DB.
# We now can compile with db4 support.
epatch ${FILESDIR}/${P}-db4-bdbobj_configure.in.patch || die "patch failed"
epatch ${FILESDIR}/${P}-db4-configure.in.patch || die "patch failed"
export WANT_AUTOCONF="2.5"
ebegin "Recreating configure"
autoconf || \
die "recreate configure failed"
eend $?
cd ${S}/maildir
ebegin "Recreating maildir/configure"
autoconf || \
die "recreate configure failed"
eend $?
cd ${S}/bdbobj
ebegin "Recreating bdbobj/configure"
autoconf || \
die "recreate configure failed"
eend $?
}
src_compile() {
vpopmail_setup
local myconf
myconf="${myconf} `use_with pam authpam`"
myconf="${myconf} `use_with ldap authldap`"
myconf="${myconf} `use_with mysql authmysql`"
myconf="${myconf} `use_with postgres authpostgresql`"
# the --with-ipv6 is broken
#myconf="${myconf} --with-ipv6"
use ipv6 || myconf="${myconf} --without-ipv6"
# 19 Aug 2004; langthang@gentoo.org
# default to gdbm if both berkdb and gdbm present.
if use berkdb; then
if use gdbm; then
einfo "build with GDBM support."
myconf="${myconf} --with-db=gdbm"
else
einfo "build with Berkeley DB support."
myconf="${myconf} --with-db=db"
fi
else
einfo "build with GDBM support."
myconf="${myconf} --with-db=gdbm"
fi
if [ -n "${VPOPMAIL_INSTALLED}" ]; then
einfo "vpopmail found"
myconf="${myconf} --with-authvchkpw"
tmpLDFLAGS="`cat ${VPOPMAIL_DIR}/etc/lib_deps`"
LDFLAGS="${LDFLAGS} ${tmpLDFLAGS}"
CFLAGS="${CFLAGS} `cat ${VPOPMAIL_DIR}/etc/inc_deps`"
else
einfo "vpopmail not found"
myconf="${myconf} --without-authvchkpw"
fi
if use nls && [ -z "$ENABLE_UNICODE" ]; then
myconf="${myconf} --enable-unicode"
elif use nls; then
myconf="${myconf} --enable-unicode=$ENABLE_UNICODE"
else
myconf="${myconf} --disable-unicode"
fi
use debug && myconf="${myconf} debug=true"
local cachefile
cachefile=${WORKDIR}/config.cache
rm -f ${cachefile}
# fix for bug #21330
CFLAGS="`echo ${CFLAGS} | xargs`"
CXXFLAGS="`echo ${CXXFLAGS} | xargs`"
LDFLAGS="`echo ${LDFLAGS} | xargs`"
# fix for bug #27528
# they really should use a better way to detect redhat
myconf="${myconf} --without-redhat"
# bug #29879 - FAM support
#if has_version 'virtual/fam' && ! use fam; then
# ewarn "FAM will be detected by the package and support will be enabled"
# ewarn "The package presently provides no way to disable fam support if you don't want it"
#fi
myconf="${myconf} `use_with fam`"
# fix for non-x86 platforms, bug #38606
# courier-imap doesn't respect just --host=$CHOST without --build
[ -z "${CBUILD}" ] && export CBUILD="${CHOST}"
# Do the actual build now
LDFLAGS="${LDFLAGS} " econf \
--disable-root-check \
--bindir=/usr/sbin \
--mandir=/usr/share/man \
--sysconfdir=/etc/courier-imap \
--libexecdir=/usr/lib/courier-imap \
--localstatedir=/var/lib/courier-imap \
--enable-workarounds-for-imap-client-bugs \
--with-authdaemonvar=/var/lib/courier-imap/authdaemon \
--cache-file=${cachefile} \
${myconf} || die "econf failed"
# change the pem file location..
cp imap/imapd-ssl.dist imap/imapd-ssl.dist.old
sed -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/imapd.pem:" \
imap/imapd-ssl.dist.old > imap/imapd-ssl.dist
cp imap/pop3d-ssl.dist imap/pop3d-ssl.dist.old
sed -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/pop3d.pem:" \
imap/pop3d-ssl.dist.old > imap/pop3d-ssl.dist
emake || die "compile problem"
}
src_install() {
vpopmail_setup
dodir /var/lib/courier-imap /etc/pam.d
make install DESTDIR=${D} || die
# avoid name collisions in /usr/sbin wrt imapd and pop3d
cd ${D}/usr/sbin
for name in imapd pop3d
do
mv ${name} "courier-${name}"
done
# hack /usr/lib/courier-imap/foo.rc to use ${MAILDIR} instead of
# 'Maildir', and to use /usr/sbin/courier-foo names.
cd ${D}/usr/lib/courier-imap
local service
for service in imapd pop3d
do
local type
for type in "" "-ssl"
do
local file
file="${service}${type}.rc"
cp ${file} ${file}.orig
sed -e 's/Maildir/${MAILDIR}/' \
-e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" \
${file}.orig > ${file}
done
done
cd ${D}/etc/courier-imap
local x
for x in pop3d pop3d-ssl imapd imapd-ssl authdaemonrc
do
mv ${x}.dist ${x}
done
insinto /etc/courier-imap
newins ${FILESDIR}/authdaemond.conf-3.0.4-r1 authdaemond.conf
# add a value for ${MAILDIR} to /etc/courier-imap/imapd
for service in imapd pop3d
do
echo -e '\n#Hardwire a value for ${MAILDIR}' >> ${service}
echo 'MAILDIR=.maildir' >> ${service}
echo 'MAILDIRPATH=.maildir' >> ${service}
echo -e '#Put any program for ${PRERUN} here' >> ${service}
echo 'PRERUN='>> ${service}
done
# upstream has an extra setting of MAILDIRPATH (it's already in the base files)
for service in imapd-ssl pop3d-ssl
do
echo -e '\n#Hardwire a value for ${MAILDIR}' >> ${service}
echo 'MAILDIRPATH=.maildir' >> ${service}
done
cd ${D}/usr/sbin
for x in *
do
if [ -L ${x} ]
then
rm ${x}
fi
done
cd ../share
mv * ../sbin
mv ../sbin/man .
cd ..
rm -f ${D}/usr/sbin/mkimapdcert ${D}/usr/sbin/mkpop3dcert
exeinto /usr/sbin
doexe ${FILESDIR}/mkimapdcert ${FILESDIR}/mkpop3dcert
dosym /usr/sbin/courierlogger /usr/lib/courier-imap/courierlogger
exeinto /etc/init.d
newexe ${FILESDIR}/authdaemond-3.0.4-r1 authdaemond
newexe ${FILESDIR}/courier-imapd.rc6 courier-imapd
newexe ${FILESDIR}/courier-imapd-ssl.rc6-3.0.5 courier-imapd-ssl
newexe ${FILESDIR}/courier-pop3d.rc6 courier-pop3d
newexe ${FILESDIR}/courier-pop3d-ssl.rc6-3.0.5 courier-pop3d-ssl
exeinto /usr/lib/courier-imap
newexe ${FILESDIR}/gentoo-imapd-1.7.3-r1.rc gentoo-imapd.rc
newexe ${FILESDIR}/gentoo-imapd-ssl-1.7.3-r1.rc gentoo-imapd-ssl.rc
newexe ${FILESDIR}/gentoo-pop3d-1.7.3-r1.rc gentoo-pop3d.rc
newexe ${FILESDIR}/gentoo-pop3d-ssl-1.7.3-r1.rc gentoo-pop3d-ssl.rc
local authmods
authmods="authsystem.passwd authcram authshadow authuserdb authpwd authtest authinfo authmksock authcustom authdaemontest"
use mysql && authmods="${authmods} authmysql"
use postgres && authmods="${authmods} authpgsql"
use pam && authmods="${authmods} authpam"
use ldap && authmods="${authmods} authldap"
[ -n "${VPOPMAIL_INSTALLED}" ] && authmods="${authmods} authvchkpw"
exeinto /usr/lib/courier-imap/authlib
for i in ${authmods}; do
[ -f ${S}/authlib/${i} ] && doexe ${S}/authlib/${i}
done;
dodir /usr/bin
mv ${D}/usr/sbin/maildirmake ${D}/usr/bin/maildirmake
keepdir /var/lib/courier-imap/authdaemon
# bug #45953, more docs
cd ${S}
dohtml -r ${S}/*
dodoc ${S}/{00README.NOW.OR.SUFFER,AUTHORS,INSTALL,NEWS,README,ChangeLog}
docinto imap
dodoc ${S}/imap/{ChangeLog,BUGS,BUGS.html,README}
docinto maildir
dodoc ${S}/maildir/{AUTHORS,INSTALL,README.maildirquota.txt,README.sharedfolders.txt}
docinto tcpd
dodoc ${S}/tcpd/README.couriertls
}
pkg_postinst() {
# rebuild init deps to include deps on authdaemond
/etc/init.d/depscan.sh
elog "Make sure to change /etc/courier-imap/authdaemond.conf if"
elog "you would like to use something other than the"
elog "authdaemond.plain authenticator"
}
src_test() {
ewarn "make check not supported by package due to"
ewarn "--enable-workarounds-for-imap-client-bugs option."
}
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/courier-imap-4.0.1-r1.ebuild,v 1.8 2008/03/15 23:07:48 halcy0n Exp $
inherit eutils
IUSE="fam berkdb gdbm debug ipv6 nls selinux"
DESCRIPTION="An IMAP daemon designed specifically for maildirs"
HOMEPAGE="http://www.courier-mta.org/"
SRC_URI="mirror://sourceforge/courier/${P}.tar.bz2"
#MY_PV=${PV/_rc*/}
#SRC_URI=""http://www.courier-mta.org/beta/imap/${PN}-${MY_PV}.tar.bz2""
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ppc64 ~s390 ~sparc ~x86"
#userpriv breaks linking against vpopmail
RESTRICT="userpriv"
RDEPEND="virtual/libc
>=dev-libs/openssl-0.9.6
>=net-libs/courier-authlib-0.50
berkdb? ( sys-libs/db )
gdbm? ( >=sys-libs/gdbm-1.8.0 )
fam? ( virtual/fam )
selinux? ( sec-policy/selinux-courier-imap )"
DEPEND="${RDEPEND}
>=sys-apps/sed-4
dev-lang/perl
sys-process/procps
!mail-mta/courier"
RDEPEND="${RDEPEND}
!virtual/imapd"
PROVIDE="virtual/imapd"
#S=${WORKDIR}/${PN}-${MY_PV}
pkg_setup() {
if ! use berkdb && ! use gdbm; then
echo
eerror "either 'berkdb' or 'gdbm' USE flag is required."
eerror "please add it to '/etc/make.conf' or '/etc/portage/package.use'"
eerror "'man 5 portage' for correct syntax usage for '/etc/postage/package.use'"
echo
die "required USE flag is missing."
fi
}
vpopmail_setup() {
VPOPMAIL_INSTALLED=
VPOPMAIL_DIR=
export VPOPMAIL_INSTALLED VPOPMAIL_DIR
VPOPMAIL_DIR=`grep ^vpopmail /etc/passwd 2>/dev/null | cut -d: -f6`
VPOPMAIL_INSTALLED=
if has_version 'net-mail/vpopmail' && [ -n "${VPOPMAIL_DIR}" ] && [ -f "${VPOPMAIL_DIR}/etc/lib_deps" ]; then
VPOPMAIL_INSTALLED=1
else
VPOPMAIL_DIR=
fi
}
src_unpack() {
unpack ${A}
cd ${S}
# bug #48838. Patch to enable/disable FAM support.
# 20 Aug 2004; langthang@gentoo.org.
# This new patch should fix bug #51540. fam USE flag is not needed for shared folder support.
epatch ${FILESDIR}/${P}-disable-fam-configure.in.patch || die "patch failed"
# These patches should fix problem detecting Berkeley DB.
# We now can compile with db4 support.
if use berkdb; then
epatch ${FILESDIR}/${P}-db4-bdbobj_configure.in.patch || die "patch failed"
epatch ${FILESDIR}/${P}-db4-configure.in.patch || die "patch failed"
fi
export WANT_AUTOCONF="2.5"
libtoolize --copy --force
ebegin "Recreating configure"
autoconf || \
die "recreate configure failed"
eend $?
cd ${S}/maildir
libtoolize --copy --force
ebegin "Recreating maildir/configure"
autoconf || \
die "recreate configure failed"
eend $?
cd ${S}/bdbobj
libtoolize --copy --force
ebegin "Recreating bdbobj/configure"
autoconf || \
die "recreate configure failed"
eend $?
}
src_compile() {
vpopmail_setup
local myconf
myconf="$(use_with ipv6)"
# 19 Aug 2004; langthang@gentoo.org
# default to gdbm if both berkdb and gdbm present.
if use gdbm; then
einfo "build with GDBM support."
myconf="${myconf} --with-db=gdbm"
elif use berkdb; then
einfo "build with Berkeley DB support."
myconf="${myconf} --with-db=db"
fi
# This check should be in courier-authlib.
# But I am not sure so I commented here
# If you are using vpopmail and everything work,
# please remove this section.
#if [ -n "${VPOPMAIL_INSTALLED}" ]; then
# einfo "vpopmail found"
# myconf="${myconf} --with-authvchkpw"
# tmpLDFLAGS="$(cat ${VPOPMAIL_DIR}/etc/lib_deps)"
# LDFLAGS="${LDFLAGS} ${tmpLDFLAGS}"
# CFLAGS="${CFLAGS} $(cat ${VPOPMAIL_DIR}/etc/inc_deps)"
#else
# einfo "vpopmail not found"
# myconf="${myconf} --without-authvchkpw"
#fi
# The default character set is ISO-8859-1/US-ASCII.
# use nls will enable all available charater sets.
# set ENABLE_UNICODE=iso-8859-1,utf-8,iso-8859-10
# to include only specified translation table.
if use nls && [ -z "$ENABLE_UNICODE" ]; then
einfo "ENABLE_UNICODE is not set build with all availbale charater sets"
myconf="${myconf} --enable-unicode"
elif use nls; then
einfo "ENABLE_UNICODE is not set build with unicode=$ENABLE_UNICODE"
myconf="${myconf} --enable-unicode=$ENABLE_UNICODE"
else
einfo "disable unicode support"
myconf="${myconf} --disable-unicode"
fi
use debug && myconf="${myconf} debug=true"
# fix for bug #27528
# they really should use a better way to detect redhat
myconf="${myconf} --without-redhat"
# bug #29879 - FAM support
myconf="${myconf} $(use_with fam)"
# bug #76592
# configure cache confuses the configure script.
#local cachefile
#cachefile=${WORKDIR}/config.cache
#rm -f ${cachefile}
# fix for bug #21330
CFLAGS="$(echo ${CFLAGS} | xargs)"
CXXFLAGS="$(echo ${CXXFLAGS} | xargs)"
LDFLAGS="$(echo ${LDFLAGS} | xargs)"
# fix for non-x86 platforms, bug #38606
# courier-imap doesn't respect just --host=$CHOST without --build
[ -z "${CBUILD}" ] && export CBUILD="${CHOST}"
# Do the actual build now
LDFLAGS="${LDFLAGS} " econf \
--disable-root-check \
--bindir=/usr/sbin \
--mandir=/usr/share/man \
--sysconfdir=/etc/courier-imap \
--libexecdir=/usr/$(get_libdir)/courier-imap \
--localstatedir=/var/lib/courier-imap \
--enable-workarounds-for-imap-client-bugs \
--with-authdaemonvar=/var/lib/courier-imap/authdaemon \
--with-mailuser=mail \
--with-mailgroup=mail \
${myconf} || die "econf failed"
# change the pem file location..
sed -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/imapd.pem:" \
-i.orig imap/imapd-ssl.dist || \
die "sed failed"
sed -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/pop3d.pem:" \
-i.orig imap/pop3d-ssl.dist || \
die "sed failed"
emake || die "compile problem"
}
src_install() {
vpopmail_setup
dodir /var/lib/courier-imap /etc/pam.d
make install DESTDIR=${D} || die
# avoid name collisions in /usr/sbin wrt imapd and pop3d
cd ${D}/usr/sbin
local name
for name in imapd pop3d; do
mv ${name} "courier-${name}" || \
die "failed to mv $name to courier-${name}"
done
# hack /usr/lib/courier-imap/foo.rc to use ${MAILDIR} instead of
# 'Maildir', and to use /usr/sbin/courier-foo names.
cd ${D}/usr/$(get_libdir)/courier-imap
local service
for service in imapd pop3d; do
local type
for type in "" "-ssl"; do
local file
file="${service}${type}.rc"
#cp ${file} ${file}.orig
#sed -e 's/Maildir/${MAILDIR}/' \
# -e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" \
# ${file}.orig > ${file}
sed -e 's/Maildir/${MAILDIR}/' \
-e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" \
-i.orig ${file} || die "sed failed"
done
done
local x
for x in pop3d pop3d-ssl imapd imapd-ssl; do
mv -v ${D}/etc/courier-imap/${x}.dist \
${D}/etc/courier-imap/${x} || \
die "failed to mv ${x}.dist to ${x}"
done
#insinto /etc/courier-imap
#newins ${FILESDIR}/authdaemond.conf-3.0.4-r1 authdaemond.conf
# add a value for ${MAILDIR} to /etc/courier-imap/imapd
cd ${D}/etc/courier-imap
# upstream has an extra setting of MAILDIRPATH (it's already in the base files)
for service in imapd-ssl pop3d-ssl imapd pop3d; do
echo -e '\n#Hardwire a value for ${MAILDIR}' >> ${service}
echo 'MAILDIR=.maildir' >> ${service}
echo 'MAILDIRPATH=.maildir' >> ${service}
done
for service in imapd pop3d; do
echo -e '#Put any program for ${PRERUN} here' >> ${service}
echo 'PRERUN=' >> ${service}
echo -e '#Put any program for ${LOGINRUN} here' >> ${service}
echo -e '#this is for relay-ctrl-allow in 4*' >> ${service}
echo 'LOGINRUN=' >> ${service}
done
cd ${D}/usr/sbin
for x in *; do
if [ -L ${x} ]; then
rm -v ${x} || die "failed to rm ${x}"
fi
done
cd ../share
mv -v * ../sbin
mv -v ../sbin/man .
cd ..
for x in mkimapdcert mkpop3dcert; do
mv ${D}/usr/sbin/${x} ${D}/usr/sbin/${x}.orig || \
die "failed to rm ${D}/usr/sbin/${x} ${D}/usr/sbin/${x}"
done
exeinto /usr/sbin
doexe ${FILESDIR}/mkimapdcert ${FILESDIR}/mkpop3dcert || \
die "doexe failed"
dosym /usr/sbin/courierlogger /usr/$(get_libdir)/courier-imap/courierlogger || \
die "dosym failed"
exeinto /etc/init.d
newexe ${FILESDIR}/${P}-courier-imapd.rc6 courier-imapd || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-imapd-ssl.rc6 courier-imapd-ssl || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-pop3d.rc6 courier-pop3d || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-pop3d-ssl.rc6 courier-pop3d-ssl || die "newexe failed"
exeinto /usr/$(get_libdir)/courier-imap
newexe ${FILESDIR}/${P}-r1-gentoo-imapd.rc gentoo-imapd.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-gentoo-imapd-ssl.rc gentoo-imapd-ssl.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-gentoo-pop3d.rc gentoo-pop3d.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-gentoo-pop3d-ssl.rc gentoo-pop3d-ssl.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-courier-imapd.indirect courier-imapd.indirect || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-courier-pop3d.indirect courier-pop3d.indirect || die "newexe failed"
#local authmods
#authmods="authsystem.passwd authcram authshadow authuserdb authpwd authtest authinfo authmksock authcustom authdaemontest"
#use mysql && authmods="${authmods} authmysql"
#use postgres && authmods="${authmods} authpgsql"
#use pam && authmods="${authmods} authpam"
#use ldap && authmods="${authmods} authldap"
#[ -n "${VPOPMAIL_INSTALLED}" ] && authmods="${authmods} authvchkpw"
#exeinto /usr/lib/courier-imap/authlib
#for i in ${authmods}; do
# [ -f ${S}/authlib/${i} ] && doexe ${S}/authlib/${i} || die "doexe failed"
#done;
dodir /usr/bin
mv ${D}/usr/sbin/maildirmake ${D}/usr/bin/maildirmake || \
die "mv failed"
# bug #45953, more docs
cd ${S}
dohtml -r ${S}/*
dodoc ${S}/{00README.NOW.OR.SUFFER,AUTHORS,INSTALL,NEWS,README,ChangeLog} \
${FILESDIR}/courier-imap-gentoo.readme
docinto imap
dodoc ${S}/imap/{ChangeLog,BUGS,BUGS.html,README}
docinto maildir
dodoc ${S}/maildir/{AUTHORS,INSTALL,README.maildirquota.txt,README.sharedfolders.txt}
docinto tcpd
dodoc ${S}/tcpd/README.couriertls
}
pkg_postinst() {
elog "Authdaemond is no longer provided this package."
elog "athentication libraries are from courier-authlib"
elog "for a quick start please refer to"
elog "/usr/share/doc/${P}/courier-imap-gentoo.readme.gz"
}
src_test() {
ewarn "make check not supported by package due to"
ewarn "--enable-workarounds-for-imap-client-bugs option."
}
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/courier-imap-4.0.1-r2.ebuild,v 1.8 2008/03/15 23:07:48 halcy0n Exp $
inherit eutils
IUSE="fam berkdb gdbm debug ipv6 nls selinux"
DESCRIPTION="An IMAP daemon designed specifically for maildirs"
HOMEPAGE="http://www.courier-mta.org/"
SRC_URI="mirror://sourceforge/courier/${P}.tar.bz2"
#MY_PV=${PV/_rc*/}
#SRC_URI=""http://www.courier-mta.org/beta/imap/${PN}-${MY_PV}.tar.bz2""
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="alpha ~amd64 ~arm ~hppa ia64 ~mips ~ppc ppc64 ~s390 ~sparc ~x86"
#userpriv breaks linking against vpopmail
RESTRICT="userpriv"
RDEPEND="virtual/libc
>=dev-libs/openssl-0.9.6
>=net-libs/courier-authlib-0.50
berkdb? ( sys-libs/db )
gdbm? ( >=sys-libs/gdbm-1.8.0 )
fam? ( virtual/fam )
selinux? ( sec-policy/selinux-courier-imap )
>=net-mail/mailbase-0.00-r8"
DEPEND="${RDEPEND}
>=sys-apps/sed-4
dev-lang/perl
sys-process/procps
!mail-mta/courier"
RDEPEND="${RDEPEND}
!virtual/imapd"
PROVIDE="virtual/imapd"
#S=${WORKDIR}/${PN}-${MY_PV}
pkg_setup() {
if ! use berkdb && ! use gdbm; then
echo
eerror "either 'berkdb' or 'gdbm' USE flag is required."
eerror "please add it to '/etc/make.conf' or '/etc/portage/package.use'"
eerror "'man 5 portage' for correct syntax usage for '/etc/postage/package.use'"
echo
die "required USE flag is missing."
fi
}
vpopmail_setup() {
VPOPMAIL_INSTALLED=
VPOPMAIL_DIR=
export VPOPMAIL_INSTALLED VPOPMAIL_DIR
VPOPMAIL_DIR=`grep ^vpopmail /etc/passwd 2>/dev/null | cut -d: -f6`
VPOPMAIL_INSTALLED=
if has_version 'net-mail/vpopmail' && [ -n "${VPOPMAIL_DIR}" ] && [ -f "${VPOPMAIL_DIR}/etc/lib_deps" ]; then
VPOPMAIL_INSTALLED=1
else
VPOPMAIL_DIR=
fi
}
src_unpack() {
unpack ${A}
cd ${S}
# bug #48838. Patch to enable/disable FAM support.
# 20 Aug 2004; langthang@gentoo.org.
# This new patch should fix bug #51540. fam USE flag is not needed for shared folder support.
epatch ${FILESDIR}/${P}-disable-fam-configure.in.patch || die "patch failed"
# These patches should fix problem detecting Berkeley DB.
# We now can compile with db4 support.
if use berkdb; then
epatch ${FILESDIR}/${P}-db4-bdbobj_configure.in.patch || die "patch failed"
epatch ${FILESDIR}/${P}-db4-configure.in.patch || die "patch failed"
fi
export WANT_AUTOCONF="2.5"
libtoolize --copy --force
ebegin "Recreating configure"
autoconf || \
die "recreate configure failed"
eend $?
cd ${S}/maildir
libtoolize --copy --force
ebegin "Recreating maildir/configure"
autoconf || \
die "recreate configure failed"
eend $?
cd ${S}/bdbobj
libtoolize --copy --force
ebegin "Recreating bdbobj/configure"
autoconf || \
die "recreate configure failed"
eend $?
}
src_compile() {
vpopmail_setup
local myconf
myconf="$(use_with ipv6)"
# 19 Aug 2004; langthang@gentoo.org
# default to gdbm if both berkdb and gdbm present.
if use gdbm; then
einfo "build with GDBM support."
myconf="${myconf} --with-db=gdbm"
elif use berkdb; then
einfo "build with Berkeley DB support."
myconf="${myconf} --with-db=db"
fi
# This check should be in courier-authlib.
# But I am not sure so I commented here
# If you are using vpopmail and everything work,
# please remove this section.
#if [ -n "${VPOPMAIL_INSTALLED}" ]; then
# einfo "vpopmail found"
# myconf="${myconf} --with-authvchkpw"
# tmpLDFLAGS="$(cat ${VPOPMAIL_DIR}/etc/lib_deps)"
# LDFLAGS="${LDFLAGS} ${tmpLDFLAGS}"
# CFLAGS="${CFLAGS} $(cat ${VPOPMAIL_DIR}/etc/inc_deps)"
#else
# einfo "vpopmail not found"
# myconf="${myconf} --without-authvchkpw"
#fi
# The default character set is ISO-8859-1/US-ASCII.
# use nls will enable all available charater sets.
# set ENABLE_UNICODE=iso-8859-1,utf-8,iso-8859-10
# to include only specified translation table.
if use nls && [ -z "$ENABLE_UNICODE" ]; then
einfo "ENABLE_UNICODE is not set build with all availbale charater sets"
myconf="${myconf} --enable-unicode"
elif use nls; then
einfo "ENABLE_UNICODE is not set build with unicode=$ENABLE_UNICODE"
myconf="${myconf} --enable-unicode=$ENABLE_UNICODE"
else
einfo "disable unicode support"
myconf="${myconf} --disable-unicode"
fi
use debug && myconf="${myconf} debug=true"
# fix for bug #27528
# they really should use a better way to detect redhat
myconf="${myconf} --without-redhat"
# bug #29879 - FAM support
myconf="${myconf} $(use_with fam)"
# bug #76592
# configure cache confuses the configure script.
#local cachefile
#cachefile=${WORKDIR}/config.cache
#rm -f ${cachefile}
# fix for bug #21330
CFLAGS="$(echo ${CFLAGS} | xargs)"
CXXFLAGS="$(echo ${CXXFLAGS} | xargs)"
LDFLAGS="$(echo ${LDFLAGS} | xargs)"
# fix for non-x86 platforms, bug #38606
# courier-imap doesn't respect just --host=$CHOST without --build
[ -z "${CBUILD}" ] && export CBUILD="${CHOST}"
# Do the actual build now
LDFLAGS="${LDFLAGS} " econf \
--disable-root-check \
--bindir=/usr/sbin \
--mandir=/usr/share/man \
--sysconfdir=/etc/courier-imap \
--libexecdir=/usr/$(get_libdir)/courier-imap \
--localstatedir=/var/lib/courier-imap \
--enable-workarounds-for-imap-client-bugs \
--with-authdaemonvar=/var/lib/courier-imap/authdaemon \
--with-mailuser=mail \
--with-mailgroup=mail \
${myconf} || die "econf failed"
# change the pem file location..
sed -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/imapd.pem:" \
-i.orig imap/imapd-ssl.dist || \
die "sed failed"
sed -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/pop3d.pem:" \
-i.orig imap/pop3d-ssl.dist || \
die "sed failed"
emake || die "compile problem"
}
src_install() {
vpopmail_setup
dodir /var/lib/courier-imap /etc/pam.d
make install DESTDIR=${D} || die
# provided by mailbase (see bug #79240)
rm -f ${D}/etc/pam.d/{imap,pop3}
# avoid name collisions in /usr/sbin wrt imapd and pop3d
cd ${D}/usr/sbin
local name
for name in imapd pop3d; do
mv ${name} "courier-${name}" || \
die "failed to mv $name to courier-${name}"
done
# hack /usr/lib/courier-imap/foo.rc to use ${MAILDIR} instead of
# 'Maildir', and to use /usr/sbin/courier-foo names.
cd ${D}/usr/$(get_libdir)/courier-imap
local service
for service in imapd pop3d; do
local type
for type in "" "-ssl"; do
local file
file="${service}${type}.rc"
#cp ${file} ${file}.orig
#sed -e 's/Maildir/${MAILDIR}/' \
# -e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" \
# ${file}.orig > ${file}
sed -e 's/Maildir/${MAILDIR}/' \
-e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" \
-i.orig ${file} || die "sed failed"
done
done
local x
for x in pop3d pop3d-ssl imapd imapd-ssl; do
mv -v ${D}/etc/courier-imap/${x}.dist \
${D}/etc/courier-imap/${x} || \
die "failed to mv ${x}.dist to ${x}"
done
#insinto /etc/courier-imap
#newins ${FILESDIR}/authdaemond.conf-3.0.4-r1 authdaemond.conf
# add a value for ${MAILDIR} to /etc/courier-imap/imapd
cd ${D}/etc/courier-imap
# upstream has an extra setting of MAILDIRPATH (it's already in the base files)
for service in imapd-ssl pop3d-ssl imapd pop3d; do
echo -e '\n#Hardwire a value for ${MAILDIR}' >> ${service}
echo 'MAILDIR=.maildir' >> ${service}
echo 'MAILDIRPATH=.maildir' >> ${service}
done
for service in imapd pop3d; do
echo -e '#Put any program for ${PRERUN} here' >> ${service}
echo 'PRERUN=' >> ${service}
echo -e '#Put any program for ${LOGINRUN} here' >> ${service}
echo -e '#this is for relay-ctrl-allow in 4*' >> ${service}
echo 'LOGINRUN=' >> ${service}
done
cd ${D}/usr/sbin
for x in *; do
if [ -L ${x} ]; then
rm -v ${x} || die "failed to rm ${x}"
fi
done
cd ../share
mv -v * ../sbin
mv -v ../sbin/man .
cd ..
for x in mkimapdcert mkpop3dcert; do
mv ${D}/usr/sbin/${x} ${D}/usr/sbin/${x}.orig || \
die "failed to rm ${D}/usr/sbin/${x} ${D}/usr/sbin/${x}"
done
exeinto /usr/sbin
doexe ${FILESDIR}/mkimapdcert ${FILESDIR}/mkpop3dcert || \
die "doexe failed"
dosym /usr/sbin/courierlogger /usr/$(get_libdir)/courier-imap/courierlogger || \
die "dosym failed"
exeinto /etc/init.d
newexe ${FILESDIR}/${P}-courier-imapd.rc6 courier-imapd || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-imapd-ssl.rc6 courier-imapd-ssl || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-pop3d.rc6 courier-pop3d || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-pop3d-ssl.rc6 courier-pop3d-ssl || die "newexe failed"
exeinto /usr/$(get_libdir)/courier-imap
newexe ${FILESDIR}/${P}-r1-gentoo-imapd.rc gentoo-imapd.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-gentoo-imapd-ssl.rc gentoo-imapd-ssl.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-gentoo-pop3d.rc gentoo-pop3d.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-gentoo-pop3d-ssl.rc gentoo-pop3d-ssl.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-courier-imapd.indirect courier-imapd.indirect || die "newexe failed"
newexe ${FILESDIR}/${P}-r1-courier-pop3d.indirect courier-pop3d.indirect || die "newexe failed"
#local authmods
#authmods="authsystem.passwd authcram authshadow authuserdb authpwd authtest authinfo authmksock authcustom authdaemontest"
#use mysql && authmods="${authmods} authmysql"
#use postgres && authmods="${authmods} authpgsql"
#use pam && authmods="${authmods} authpam"
#use ldap && authmods="${authmods} authldap"
#[ -n "${VPOPMAIL_INSTALLED}" ] && authmods="${authmods} authvchkpw"
#exeinto /usr/lib/courier-imap/authlib
#for i in ${authmods}; do
# [ -f ${S}/authlib/${i} ] && doexe ${S}/authlib/${i} || die "doexe failed"
#done;
dodir /usr/bin
mv ${D}/usr/sbin/maildirmake ${D}/usr/bin/maildirmake || \
die "mv failed"
# bug #45953, more docs
cd ${S}
dohtml -r ${S}/*
dodoc ${S}/{00README.NOW.OR.SUFFER,AUTHORS,INSTALL,NEWS,README,ChangeLog} \
${FILESDIR}/courier-imap-gentoo.readme
docinto imap
dodoc ${S}/imap/{ChangeLog,BUGS,BUGS.html,README}
docinto maildir
dodoc ${S}/maildir/{AUTHORS,INSTALL,README.maildirquota.txt,README.sharedfolders.txt}
docinto tcpd
dodoc ${S}/tcpd/README.couriertls
}
pkg_postinst() {
elog "Authdaemond is no longer provided this package."
elog "athentication libraries are from courier-authlib"
elog "for a quick start please refer to"
elog "/usr/share/doc/${P}/courier-imap-gentoo.readme.gz"
}
src_test() {
ewarn "make check not supported by package due to"
ewarn "--enable-workarounds-for-imap-client-bugs option."
}
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/courier-imap-4.0.1.ebuild,v 1.16 2008/03/17 04:55:13 ricmm Exp $
inherit eutils
DESCRIPTION="An IMAP daemon designed specifically for maildirs"
HOMEPAGE="http://www.courier-mta.org/"
SRC_URI="mirror://sourceforge/courier/${P}.tar.bz2"
#MY_PV=${PV/_rc*/}
#SRC_URI=""http://www.courier-mta.org/beta/imap/${PN}-${MY_PV}.tar.bz2""
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~alpha amd64 arm hppa ia64 ~mips ppc ~ppc64 s390 sh sparc x86"
IUSE="fam berkdb gdbm debug ipv6 nls selinux"
#userpriv breaks linking against vpopmail
RESTRICT="userpriv"
RDEPEND="virtual/libc
>=dev-libs/openssl-0.9.6
berkdb? ( sys-libs/db )
gdbm? ( >=sys-libs/gdbm-1.8.0 )
fam? ( virtual/fam )
selinux? ( sec-policy/selinux-courier-imap )"
DEPEND="${RDEPEND}
>=sys-apps/sed-4
dev-lang/perl
sys-process/procps
>=net-libs/courier-authlib-0.50
!mail-mta/courier"
RDEPEND="${RDEPEND}
!virtual/imapd"
PROVIDE="virtual/imapd"
#S=${WORKDIR}/${PN}-${MY_PV}
pkg_setup() {
if ! use berkdb && ! use gdbm; then
echo
eerror "either 'berkdb' or 'gdbm' USE flag is required."
eerror "please add it to '/etc/make.conf' or '/etc/portage/package.use'"
eerror "'man 5 portage' for correct syntax usage for '/etc/postage/package.use'"
echo
die "required USE flag is missing."
fi
}
vpopmail_setup() {
VPOPMAIL_INSTALLED=
VPOPMAIL_DIR=
export VPOPMAIL_INSTALLED VPOPMAIL_DIR
VPOPMAIL_DIR=`grep ^vpopmail /etc/passwd 2>/dev/null | cut -d: -f6`
VPOPMAIL_INSTALLED=
if has_version 'net-mail/vpopmail' && [ -n "${VPOPMAIL_DIR}" ] && [ -f "${VPOPMAIL_DIR}/etc/lib_deps" ]; then
VPOPMAIL_INSTALLED=1
else
VPOPMAIL_DIR=
fi
}
src_unpack() {
unpack ${A}
cd ${S}
# bug #48838. Patch to enable/disable FAM support.
# 20 Aug 2004; langthang@gentoo.org.
# This new patch should fix bug #51540. fam USE flag is not needed for shared folder support.
epatch ${FILESDIR}/${P}-disable-fam-configure.in.patch || die "patch failed"
# These patches should fix problem detecting Berkeley DB.
# We now can compile with db4 support.
if use berkdb; then
epatch ${FILESDIR}/${P}-db4-bdbobj_configure.in.patch || die "patch failed"
epatch ${FILESDIR}/${P}-db4-configure.in.patch || die "patch failed"
fi
export WANT_AUTOCONF="2.5"
libtoolize --copy --force
ebegin "Recreating configure"
autoconf || \
die "recreate configure failed"
eend $?
cd ${S}/maildir
libtoolize --copy --force
ebegin "Recreating maildir/configure"
autoconf || \
die "recreate configure failed"
eend $?
cd ${S}/bdbobj
libtoolize --copy --force
ebegin "Recreating bdbobj/configure"
autoconf || \
die "recreate configure failed"
eend $?
}
src_compile() {
vpopmail_setup
local myconf
myconf="$(use_with ipv6)"
# 19 Aug 2004; langthang@gentoo.org
# default to gdbm if both berkdb and gdbm present.
if use gdbm; then
einfo "build with GDBM support."
myconf="${myconf} --with-db=gdbm"
elif use berkdb; then
einfo "build with Berkeley DB support."
myconf="${myconf} --with-db=db"
fi
# This check should be in courier-authlib.
# But I am not sure so I commented here
# If you are using vpopmail and everything work,
# please remove this section.
#if [ -n "${VPOPMAIL_INSTALLED}" ]; then
# einfo "vpopmail found"
# myconf="${myconf} --with-authvchkpw"
# tmpLDFLAGS="$(cat ${VPOPMAIL_DIR}/etc/lib_deps)"
# LDFLAGS="${LDFLAGS} ${tmpLDFLAGS}"
# CFLAGS="${CFLAGS} $(cat ${VPOPMAIL_DIR}/etc/inc_deps)"
#else
# einfo "vpopmail not found"
# myconf="${myconf} --without-authvchkpw"
#fi
# The default character set is ISO-8859-1/US-ASCII.
# use nls will enable all available charater sets.
# set ENABLE_UNICODE=iso-8859-1,utf-8,iso-8859-10
# to include only specified translation table.
if use nls && [ -z "$ENABLE_UNICODE" ]; then
einfo "ENABLE_UNICODE is not set build with all availbale charater sets"
myconf="${myconf} --enable-unicode"
elif use nls; then
einfo "ENABLE_UNICODE is not set build with unicode=$ENABLE_UNICODE"
myconf="${myconf} --enable-unicode=$ENABLE_UNICODE"
else
einfo "disable unicode support"
myconf="${myconf} --disable-unicode"
fi
use debug && myconf="${myconf} debug=true"
# fix for bug #27528
# they really should use a better way to detect redhat
myconf="${myconf} --without-redhat"
# bug #29879 - FAM support
myconf="${myconf} $(use_with fam)"
# bug #76592
# configure cache confuses the configure script.
#local cachefile
#cachefile=${WORKDIR}/config.cache
#rm -f ${cachefile}
# fix for bug #21330
CFLAGS="$(echo ${CFLAGS} | xargs)"
CXXFLAGS="$(echo ${CXXFLAGS} | xargs)"
LDFLAGS="$(echo ${LDFLAGS} | xargs)"
# fix for non-x86 platforms, bug #38606
# courier-imap doesn't respect just --host=$CHOST without --build
[ -z "${CBUILD}" ] && export CBUILD="${CHOST}"
# Do the actual build now
LDFLAGS="${LDFLAGS} " econf \
--disable-root-check \
--bindir=/usr/sbin \
--mandir=/usr/share/man \
--sysconfdir=/etc/courier-imap \
--libexecdir=/usr/$(get_libdir)/courier-imap \
--localstatedir=/var/lib/courier-imap \
--enable-workarounds-for-imap-client-bugs \
--with-authdaemonvar=/var/lib/courier-imap/authdaemon \
--with-mailuser=mail \
--with-mailgroup=mail \
${myconf} || die "econf failed"
# change the pem file location..
sed -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/imapd.pem:" \
-i.orig imap/imapd-ssl.dist || \
die "sed failed"
sed -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/pop3d.pem:" \
-i.orig imap/pop3d-ssl.dist || \
die "sed failed"
emake || die "compile problem"
}
src_install() {
vpopmail_setup
dodir /var/lib/courier-imap /etc/pam.d
make install DESTDIR=${D} || die
# avoid name collisions in /usr/sbin wrt imapd and pop3d
cd ${D}/usr/sbin
local name
for name in imapd pop3d; do
mv ${name} "courier-${name}" || \
die "failed to mv $name to courier-${name}"
done
# hack /usr/lib/courier-imap/foo.rc to use ${MAILDIR} instead of
# 'Maildir', and to use /usr/sbin/courier-foo names.
cd ${D}/usr/$(get_libdir)/courier-imap
local service
for service in imapd pop3d; do
local type
for type in "" "-ssl"; do
local file
file="${service}${type}.rc"
#cp ${file} ${file}.orig
#sed -e 's/Maildir/${MAILDIR}/' \
# -e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" \
# ${file}.orig > ${file}
sed -e 's/Maildir/${MAILDIR}/' \
-e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" \
-i.orig ${file} || die "sed failed"
done
done
local x
for x in pop3d pop3d-ssl imapd imapd-ssl; do
mv -v ${D}/etc/courier-imap/${x}.dist \
${D}/etc/courier-imap/${x} || \
die "failed to mv ${x}.dist to ${x}"
done
#insinto /etc/courier-imap
#newins ${FILESDIR}/authdaemond.conf-3.0.4-r1 authdaemond.conf
# add a value for ${MAILDIR} to /etc/courier-imap/imapd
cd ${D}/etc/courier-imap
for service in imapd pop3d; do
echo -e '\n#Hardwire a value for ${MAILDIR}' >> ${service}
echo 'MAILDIR=.maildir' >> ${service}
echo 'MAILDIRPATH=.maildir' >> ${service}
echo -e '#Put any program for ${PRERUN} here' >> ${service}
echo 'PRERUN='>> ${service}
done
# upstream has an extra setting of MAILDIRPATH (it's already in the base files)
for service in imapd-ssl pop3d-ssl; do
echo -e '\n#Hardwire a value for ${MAILDIR}' >> ${service}
echo 'MAILDIRPATH=.maildir' >> ${service}
done
cd ${D}/usr/sbin
for x in *; do
if [ -L ${x} ]; then
rm -v ${x} || die "failed to rm ${x}"
fi
done
cd ../share
mv -v * ../sbin
mv -v ../sbin/man .
cd ..
for x in mkimapdcert mkpop3dcert; do
mv ${D}/usr/sbin/${x} ${D}/usr/sbin/${x}.orig || \
die "failed to rm ${D}/usr/sbin/${x} ${D}/usr/sbin/${x}"
done
exeinto /usr/sbin
doexe ${FILESDIR}/mkimapdcert ${FILESDIR}/mkpop3dcert || \
die "doexe failed"
dosym /usr/sbin/courierlogger /usr/$(get_libdir)/courier-imap/courierlogger || \
die "dosym failed"
exeinto /etc/init.d
newexe ${FILESDIR}/${P}-courier-imapd.rc6 courier-imapd || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-imapd-ssl.rc6 courier-imapd-ssl || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-pop3d.rc6 courier-pop3d || die "newexe failed"
newexe ${FILESDIR}/${P}-courier-pop3d-ssl.rc6 courier-pop3d-ssl || die "newexe failed"
exeinto /usr/$(get_libdir)/courier-imap
newexe ${FILESDIR}/${P}-gentoo-imapd.rc gentoo-imapd.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-gentoo-imapd-ssl.rc gentoo-imapd-ssl.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-gentoo-pop3d.rc gentoo-pop3d.rc || die "newexe failed"
newexe ${FILESDIR}/${P}-gentoo-pop3d-ssl.rc gentoo-pop3d-ssl.rc || die "newexe failed"
#local authmods
#authmods="authsystem.passwd authcram authshadow authuserdb authpwd authtest authinfo authmksock authcustom authdaemontest"
#use mysql && authmods="${authmods} authmysql"
#use postgres && authmods="${authmods} authpgsql"
#use pam && authmods="${authmods} authpam"
#use ldap && authmods="${authmods} authldap"
#[ -n "${VPOPMAIL_INSTALLED}" ] && authmods="${authmods} authvchkpw"
#exeinto /usr/lib/courier-imap/authlib
#for i in ${authmods}; do
# [ -f ${S}/authlib/${i} ] && doexe ${S}/authlib/${i} || die "doexe failed"
#done;
dodir /usr/bin
mv ${D}/usr/sbin/maildirmake ${D}/usr/bin/maildirmake || \
die "mv failed"
# bug #45953, more docs
cd ${S}
dohtml -r ${S}/*
dodoc ${S}/{00README.NOW.OR.SUFFER,AUTHORS,INSTALL,NEWS,README,ChangeLog} \
${FILESDIR}/courier-imap-gentoo.readme
docinto imap
dodoc ${S}/imap/{ChangeLog,BUGS,BUGS.html,README}
docinto maildir
dodoc ${S}/maildir/{AUTHORS,INSTALL,README.maildirquota.txt,README.sharedfolders.txt}
docinto tcpd
dodoc ${S}/tcpd/README.couriertls
}
pkg_postinst() {
elog "Authdaemond is no longer provided this package."
elog "athentication libraries are from courier-authlib"
elog "for a quick start please refer to"
elog "/usr/share/doc/${P}/courier-imap-gentoo.readme.gz"
}
src_test() {
ewarn "make check not supported by package due to"
ewarn "--enable-workarounds-for-imap-client-bugs option."
}
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/courier-imap-4.0.4.ebuild,v 1.18 2008/03/17 04:55:13 ricmm Exp $
inherit eutils
IUSE="fam berkdb gdbm debug ipv6 nls selinux"
DESCRIPTION="An IMAP daemon designed specifically for maildirs"
HOMEPAGE="http://www.courier-mta.org/"
SRC_URI="mirror://sourceforge/courier/${P}.tar.bz2"
#MY_PV=${PV/_rc*/}
#SRC_URI=""http://www.courier-mta.org/beta/imap/${PN}-${MY_PV}.tar.bz2""
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="alpha amd64 arm hppa ia64 ~mips ppc ppc64 s390 sparc x86"
#userpriv breaks linking against vpopmail
RESTRICT="userpriv"
RDEPEND="virtual/libc
>=dev-libs/openssl-0.9.6
>=net-libs/courier-authlib-0.57
berkdb? ( sys-libs/db )
gdbm? ( >=sys-libs/gdbm-1.8.0 )
fam? ( virtual/fam )
selinux? ( sec-policy/selinux-courier-imap )
>=net-mail/mailbase-0.00-r8"
DEPEND="${RDEPEND}
dev-lang/perl
userland_GNU? ( sys-process/procps )
!mail-mta/courier"
RDEPEND="${RDEPEND}
!virtual/imapd"
PROVIDE="virtual/imapd"
RC_VER="4.0.1-r1"
INITD_VER="4.0.4"
#S=${WORKDIR}/${PN}-${MY_PV}
pkg_setup() {
if ! use berkdb && ! use gdbm; then
echo
eerror "either 'berkdb' or 'gdbm' USE flag is required."
eerror "please add it to '/etc/make.conf' or '/etc/portage/package.use'"
eerror "'man 5 portage' for correct syntax usage for '/etc/portage/package.use'"
echo
die "required USE flag is missing."
fi
}
vpopmail_setup() {
VPOPMAIL_INSTALLED=
VPOPMAIL_DIR=
export VPOPMAIL_INSTALLED VPOPMAIL_DIR
VPOPMAIL_DIR=$(grep ^vpopmail /etc/passwd 2>/dev/null | cut -d: -f6)
VPOPMAIL_INSTALLED=
if has_version 'net-mail/vpopmail' && [[ -n "${VPOPMAIL_DIR}" ]] && [[ -f "${VPOPMAIL_DIR}/etc/lib_deps" ]]; then
VPOPMAIL_INSTALLED=1
else
VPOPMAIL_DIR=
fi
}
src_unpack() {
unpack ${A}
cd ${S}
# bug #48838. Patch to enable/disable FAM support.
# 20 Aug 2004; langthang@gentoo.org.
# This new patch should fix bug #51540. fam USE flag is not needed for shared folder support.
epatch ${FILESDIR}/${PN}-4.0.1-disable-fam-configure.in.patch
# These patches should fix problem detecting Berkeley DB.
# We now can compile with db4 support.
if use berkdb; then
epatch ${FILESDIR}/${PN}-4.0.1-db4-bdbobj_configure.in.patch
epatch ${FILESDIR}/${PN}-4.0.1-db4-configure.in.patch
fi
export WANT_AUTOCONF="2.5"
libtoolize --copy --force
ebegin "Recreating configure"
autoconf || die "autoconf on . failed"
eend $?
cd ${S}/maildir
libtoolize --copy --force
ebegin "Recreating maildir/configure"
autoconf || die "autoconf on maildir failed"
eend $?
cd ${S}/bdbobj
libtoolize --copy --force
ebegin "Recreating bdbobj/configure"
autoconf || die "autoconf on bdbobj failed"
eend $?
}
src_compile() {
vpopmail_setup
local myconf
# 19 Aug 2004; langthang@gentoo.org
# default to gdbm if both berkdb and gdbm present.
if use gdbm; then
einfo "build with GDBM support."
myconf="${myconf} --with-db=gdbm"
elif use berkdb; then
einfo "build with Berkeley DB support."
myconf="${myconf} --with-db=db"
fi
# This check should be in courier-authlib.
# But I am not sure so I commented here
# If you are using vpopmail and everything work,
# please remove this section.
#if [ -n "${VPOPMAIL_INSTALLED}" ]; then
# einfo "vpopmail found"
# myconf="${myconf} --with-authvchkpw"
# tmpLDFLAGS="$(cat ${VPOPMAIL_DIR}/etc/lib_deps)"
# LDFLAGS="${LDFLAGS} ${tmpLDFLAGS}"
# CFLAGS="${CFLAGS} $(cat ${VPOPMAIL_DIR}/etc/inc_deps)"
#else
# einfo "vpopmail not found"
# myconf="${myconf} --without-authvchkpw"
#fi
# The default character set is ISO-8859-1/US-ASCII.
# use nls will enable all available charater sets.
# set ENABLE_UNICODE=iso-8859-1,utf-8,iso-8859-10
# to include only specified translation table.
if use nls && [[ -z "$ENABLE_UNICODE" ]]; then
einfo "ENABLE_UNICODE is not set build with all availbale charater sets"
myconf="${myconf} --enable-unicode"
elif use nls; then
einfo "ENABLE_UNICODE is set build with unicode=$ENABLE_UNICODE"
myconf="${myconf} --enable-unicode=$ENABLE_UNICODE"
else
einfo "disable unicode support"
myconf="${myconf} --disable-unicode"
fi
use debug && myconf="${myconf} debug=true"
# fix for bug #21330
CFLAGS="$(echo ${CFLAGS} | xargs)"
CXXFLAGS="$(echo ${CXXFLAGS} | xargs)"
LDFLAGS="$(echo ${LDFLAGS} | xargs)"
# Do the actual build now
LDFLAGS="${LDFLAGS} " econf \
--disable-root-check \
--bindir=/usr/sbin \
--mandir=/usr/share/man \
--sysconfdir=/etc/courier-imap \
--libexecdir=/usr/$(get_libdir)/courier-imap \
--localstatedir=/var/lib/courier-imap \
--enable-workarounds-for-imap-client-bugs \
--with-authdaemonvar=/var/lib/courier-imap/authdaemon \
--with-mailuser=mail \
--with-mailgroup=mail \
$(use_with ipv6) \
$(use_with fam) \
${myconf} || die "econf failed"
# change the pem file location..
sed -i -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/imapd.pem:" \
imap/imapd-ssl.dist || \
die "sed failed"
sed -i -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/pop3d.pem:" \
imap/pop3d-ssl.dist || \
die "sed failed"
emake || die "compile problem"
}
src_install() {
vpopmail_setup
dodir /var/lib/courier-imap /etc/pam.d
make install DESTDIR=${D} || die
rm -rf ${D}/etc/pam.d
# avoid name collisions in /usr/sbin wrt imapd and pop3d
cd ${D}/usr/sbin
local name
for name in imapd pop3d; do
mv ${name} "courier-${name}" || \
die "failed to mv $name to courier-${name}"
done
# hack /usr/lib/courier-imap/foo.rc to use ${MAILDIR} instead of
# 'Maildir', and to use /usr/sbin/courier-foo names.
cd ${D}/usr/$(get_libdir)/courier-imap
local service
for service in imapd pop3d; do
local type
for type in "" "-ssl"; do
local file
file="${service}${type}.rc"
sed -i -e 's/Maildir/${MAILDIR}/' ${file} || die "sed failed"
sed -i -e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" \
${file} || die "sed failed"
done
done
local x
for x in pop3d pop3d-ssl imapd imapd-ssl; do
mv -v ${D}/etc/courier-imap/${x}.dist \
${D}/etc/courier-imap/${x} || \
die "failed to mv ${x}.dist to ${x}"
done
#insinto /etc/courier-imap
#newins ${FILESDIR}/authdaemond.conf-3.0.4-r1 authdaemond.conf
# add a value for ${MAILDIR} to /etc/courier-imap/imapd
cd ${D}/etc/courier-imap
# upstream has an extra setting of MAILDIRPATH (it's already in the base files)
for service in imapd-ssl pop3d-ssl imapd pop3d; do
echo -e '\n#Hardwire a value for ${MAILDIR}' >> ${service}
echo 'MAILDIR=.maildir' >> ${service}
echo 'MAILDIRPATH=.maildir' >> ${service}
done
for service in imapd pop3d; do
echo -e '#Put any program for ${PRERUN} here' >> ${service}
echo 'PRERUN=' >> ${service}
echo -e '#Put any program for ${LOGINRUN} here' >> ${service}
echo -e '#this is for relay-ctrl-allow in 4*' >> ${service}
echo 'LOGINRUN=' >> ${service}
done
cd ${D}/usr/sbin
for x in *; do
if [[ -L ${x} ]]; then
rm -v ${x} || die "failed to rm ${x}"
fi
done
cd ../share
mv -v * ../sbin
mv -v ../sbin/man .
cd ..
for x in mkimapdcert mkpop3dcert; do
mv ${D}/usr/sbin/${x} ${D}/usr/sbin/${x}.orig || \
die "failed to rm ${D}/usr/sbin/${x} ${D}/usr/sbin/${x}"
done
exeinto /usr/sbin
doexe ${FILESDIR}/mkimapdcert ${FILESDIR}/mkpop3dcert || \
die "doexe failed"
dosym /usr/sbin/courierlogger /usr/$(get_libdir)/courier-imap/courierlogger || \
die "dosym failed"
newinitd ${FILESDIR}/${PN}-${INITD_VER}-courier-imapd.rc6 courier-imapd || die "newinitd failed"
newinitd ${FILESDIR}/${PN}-${INITD_VER}-courier-imapd-ssl.rc6 courier-imapd-ssl || die "newinitd failed"
newinitd ${FILESDIR}/${PN}-${INITD_VER}-courier-pop3d.rc6 courier-pop3d || die "newinitd failed"
newinitd ${FILESDIR}/${PN}-${INITD_VER}-courier-pop3d-ssl.rc6 courier-pop3d-ssl || die "newinitd failed"
exeinto /usr/$(get_libdir)/courier-imap
newexe ${FILESDIR}/${PN}-${RC_VER}-gentoo-imapd.rc gentoo-imapd.rc || die "newexe failed"
newexe ${FILESDIR}/${PN}-${RC_VER}-gentoo-imapd-ssl.rc gentoo-imapd-ssl.rc || die "newexe failed"
newexe ${FILESDIR}/${PN}-${RC_VER}-gentoo-pop3d.rc gentoo-pop3d.rc || die "newexe failed"
newexe ${FILESDIR}/${PN}-${RC_VER}-gentoo-pop3d-ssl.rc gentoo-pop3d-ssl.rc || die "newexe failed"
newexe ${FILESDIR}/${PN}-${RC_VER}-courier-imapd.indirect courier-imapd.indirect || die "newexe failed"
newexe ${FILESDIR}/${PN}-${RC_VER}-courier-pop3d.indirect courier-pop3d.indirect || die "newexe failed"
#local authmods
#authmods="authsystem.passwd authcram authshadow authuserdb authpwd authtest authinfo authmksock authcustom authdaemontest"
#use mysql && authmods="${authmods} authmysql"
#use postgres && authmods="${authmods} authpgsql"
#use pam && authmods="${authmods} authpam"
#use ldap && authmods="${authmods} authldap"
#[ -n "${VPOPMAIL_INSTALLED}" ] && authmods="${authmods} authvchkpw"
#exeinto /usr/lib/courier-imap/authlib
#for i in ${authmods}; do
# [ -f ${S}/authlib/${i} ] && doexe ${S}/authlib/${i} || die "doexe failed"
#done;
dodir /usr/bin
mv ${D}/usr/sbin/maildirmake ${D}/usr/bin/maildirmake || \
die "mv failed"
# bug #45953, more docs
cd ${S}
dohtml -r ${S}/*
dodoc ${S}/{00README.NOW.OR.SUFFER,AUTHORS,INSTALL,NEWS,README,ChangeLog} \
${FILESDIR}/courier-imap-gentoo.readme
docinto imap
dodoc ${S}/imap/{ChangeLog,BUGS,BUGS.html,README}
docinto maildir
dodoc ${S}/maildir/{AUTHORS,INSTALL,README.maildirquota.txt,README.sharedfolders.txt}
docinto tcpd
dodoc ${S}/tcpd/README.couriertls
}
pkg_postinst() {
elog "Authdaemond is no longer provided this package."
elog "authentication libraries are from courier-authlib"
elog "for a quick start please refer to"
elog "/usr/share/doc/${P}/courier-imap-gentoo.readme.gz"
# some users have been reporting that permissions on this directory were getting
# scrambled, so let's ensure that they are sane.
chmod 755 ${ROOT}/usr/$(get_libdir)/courier-imap || die "Failed to ensure sane permissions"
}
src_test() {
ewarn "make check not supported by package due to"
ewarn "--enable-workarounds-for-imap-client-bugs option."
}
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/courier-imap-4.0.6-r2.ebuild,v 1.12 2008/03/15 23:07:48 halcy0n Exp $
inherit autotools eutils multilib
KEYWORDS="alpha amd64 arm hppa ia64 ~mips ppc ppc64 s390 sparc x86"
DESCRIPTION="An IMAP daemon designed specifically for maildirs."
HOMEPAGE="http://www.courier-mta.org/"
SRC_URI="mirror://sourceforge/courier/${P}.tar.bz2"
LICENSE="GPL-2"
SLOT="0"
IUSE="berkdb debug fam gdbm ipv6 nls selinux"
# userpriv breaks linking against vpopmail
RESTRICT="userpriv"
RDEPEND=">=dev-libs/openssl-0.9.6
>=net-libs/courier-authlib-0.57
>=net-mail/mailbase-0.00-r8
berkdb? ( sys-libs/db )
fam? ( virtual/fam )
gdbm? ( >=sys-libs/gdbm-1.8.0 )
selinux? ( sec-policy/selinux-courier-imap )"
DEPEND="${RDEPEND}
dev-lang/perl
!mail-mta/courier
userland_GNU? ( sys-process/procps )"
RDEPEND="${RDEPEND}
!virtual/imapd"
PROVIDE="virtual/imapd"
RC_VER="4.0.6-r1"
INITD_VER="4.0.6-r1"
pkg_setup() {
if ! use berkdb && ! use gdbm ; then
echo
eerror "Either the 'berkdb' or the 'gdbm' USE flag is required."
eerror "Please add it to '/etc/make.conf' or '/etc/portage/package.use'."
eerror "Use 'man 5 portage' for more info on '/etc/portage/package.use'."
echo
die "Required USE flag missing."
fi
}
vpopmail_setup() {
VPOPMAIL_INSTALLED=
VPOPMAIL_DIR=
export VPOPMAIL_INSTALLED VPOPMAIL_DIR
VPOPMAIL_DIR=$(grep ^vpopmail /etc/passwd 2>/dev/null | cut -d: -f6)
VPOPMAIL_INSTALLED=
if has_version 'net-mail/vpopmail' && [[ -n "${VPOPMAIL_DIR}" ]] && [[ -f "${VPOPMAIL_DIR}/etc/lib_deps" ]] ; then
VPOPMAIL_INSTALLED=1
else
VPOPMAIL_DIR=
fi
}
src_unpack() {
unpack ${A}
cd "${S}"
# Bug #48838. Patch to enable/disable FAM support.
# 20 Aug 2004 langthang@gentoo.org
# This patch should fix bug #51540. fam USE flag is not needed for shared folder support.
epatch "${FILESDIR}"/${PN}-4.0.1-disable-fam-configure.in.patch
# Kill unneeded call to AC_PROG_SYSCONFTOOL (bug #168206).
epatch "${FILESDIR}"/${P}-aclocal-fix.patch
# These patches should fix problems detecting BerkeleyDB.
# We now can compile with db4 support.
if use berkdb ; then
epatch "${FILESDIR}"/${P}-db4-bdbobj_configure.in.patch
epatch "${FILESDIR}"/${P}-db4-tcpd_configure.in.patch
epatch "${FILESDIR}"/${P}-db4-configure.in.patch
fi
ebegin "Recreating configure"
AT_NO_RECURSIVE="true" eautoreconf || die "eautoreconf on . failed"
eend $?
cd "${S}/maildir"
ebegin "Recreating maildir/configure"
eautoreconf || die "eautoreconf on maildir failed"
eend $?
cd "${S}/bdbobj"
ebegin "Recreating bdbobj/configure"
eautoreconf || die "eautoreconf on bdbobj failed"
eend $?
cd "${S}/tcpd"
ebegin "Recreating tcpd/configure"
eautoreconf || die "eautoreconf on tcpd failed"
eend $?
}
src_compile() {
vpopmail_setup
local myconf=""
# 19 Aug 2004 langthang@gentoo.org
# Default to gdbm if both berkdb and gdbm are present.
if use gdbm ; then
einfo "Building with GDBM support"
myconf="${myconf} --with-db=gdbm"
elif use berkdb ; then
einfo "Building with BerkeleyDB support"
myconf="${myconf} --with-db=db"
fi
# The default character set is ISO-8859-1/US-ASCII.
# USE 'nls' will enable all available character sets.
# Set ENABLE_UNICODE=iso-8859-1,utf-8,iso-8859-10
# to include only specified translation tables.
if use nls && [[ -z "${ENABLE_UNICODE}" ]] ; then
einfo "ENABLE_UNICODE is not set, building with all available character sets"
myconf="${myconf} --enable-unicode"
elif use nls ; then
einfo "ENABLE_UNICODE is set, building with unicode=${ENABLE_UNICODE}"
myconf="${myconf} --enable-unicode=${ENABLE_UNICODE}"
else
einfo "Disabling unicode support"
myconf="${myconf} --disable-unicode"
fi
use debug && myconf="${myconf} debug=true"
# Fix for bug #21330
CFLAGS="$(echo ${CFLAGS} | xargs)"
CXXFLAGS="$(echo ${CXXFLAGS} | xargs)"
LDFLAGS="$(echo ${LDFLAGS} | xargs)"
# Do the actual build now
LDFLAGS="${LDFLAGS} " econf \
--disable-root-check \
--bindir=/usr/sbin \
--mandir=/usr/share/man \
--sysconfdir=/etc/${PN} \
--libexecdir=/usr/$(get_libdir)/${PN} \
--localstatedir=/var/lib/${PN} \
--with-authdaemonvar=/var/lib/${PN}/authdaemon \
--enable-workarounds-for-imap-client-bugs \
--with-mailuser=mail \
--with-mailgroup=mail \
$(use_with fam) \
$(use_with ipv6) \
${myconf} || die "econf failed"
# Change the pem file location.
sed -i -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/imapd.pem:" \
imap/imapd-ssl.dist || \
die "sed failed"
sed -i -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/pop3d.pem:" \
imap/pop3d-ssl.dist || \
die "sed failed"
emake || die "emake failed"
}
src_install() {
vpopmail_setup
dodir /var/lib/${PN} /etc/pam.d
emake DESTDIR="${D}" install || die "emake install failed"
rm -Rf "${D}/etc/pam.d"
# Avoid name collisions in /usr/sbin wrt imapd and pop3d
cd "${D}/usr/sbin"
for name in imapd pop3d ; do
mv -f "${name}" "courier-${name}" || die "Failed to mv ${name} to courier-${name}"
done
# Hack /usr/lib/courier-imap/foo.rc to use ${MAILDIR} instead of
# 'Maildir', and to use /usr/sbin/courier-foo names.
cd "${D}/usr/$(get_libdir)/${PN}"
for service in {imapd,pop3d}{,-ssl} ; do
sed -i -e 's/Maildir/${MAILDIR}/' "${service}.rc" || die "sed failed"
sed -i -e "s/\/usr\/sbin\/${service}/\/usr\/sbin\/courier-${service}/" "${service}.rc" || die "sed failed"
done
# Rename the config files correctly and add a value for ${MAILDIR} to them.
cd "${D}/etc/${PN}"
for service in {imapd,pop3d}{,-ssl} ; do
mv -f "${service}.dist" "${service}" || die "Failed to mv ${service}.dist to ${service}"
echo -e '\n# Hardwire a value for ${MAILDIR}' >> "${service}"
echo 'MAILDIR=.maildir' >> "${service}"
echo 'MAILDIRPATH=.maildir' >> "${service}"
done
for service in imapd pop3d ; do
echo -e '# Put any program for ${PRERUN} here' >> "${service}"
echo 'PRERUN=' >> "${service}"
echo -e '# Put any program for ${LOGINRUN} here' >> "${service}"
echo -e '# this is for relay-ctrl-allow in 4*' >> "${service}"
echo 'LOGINRUN=' >> "${service}"
done
cd "${D}/usr/sbin"
for x in * ; do
if [[ -L "${x}" ]] ; then
rm -f "${x}" || die "Failed to rm ${x}"
fi
done
cd ../share
mv -f * ../sbin
mv -f ../sbin/man .
cd ..
for x in mkimapdcert mkpop3dcert ; do
mv -f "${D}/usr/sbin/${x}" "${D}/usr/sbin/${x}.orig" || die "Failed to mv /usr/sbin/${x} to /usr/sbin/${x}.orig"
done
exeinto /usr/sbin
doexe "${FILESDIR}/mkimapdcert" "${FILESDIR}/mkpop3dcert" || die "doexe failed"
dosym /usr/sbin/courierlogger /usr/$(get_libdir)/${PN}/courierlogger || die "dosym failed"
mkdir "${WORKDIR}/tmp" ; cd "${WORKDIR}/tmp"
for initd in courier-{imapd,pop3d}{,-ssl} ; do
sed -e "s:GENTOO_LIBDIR:$(get_libdir):g" "${FILESDIR}/${PN}-${INITD_VER}-${initd}.rc6" > "${initd}" || die "initd libdir-sed failed"
doinitd "${initd}" || die "doinitd ${initd} failed"
done
exeinto /usr/$(get_libdir)/${PN}
for exe in gentoo-{imapd,pop3d}{,-ssl}.rc courier-{imapd,pop3d}.indirect ; do
sed -e "s:GENTOO_LIBDIR:$(get_libdir):g" "${FILESDIR}/${PN}-${RC_VER}-${exe}" > "${exe}" || die "exe libdir-sed failed"
doexe "${exe}" || die "doexe ${exe} failed"
done
dodir /usr/bin
mv -f "${D}/usr/sbin/maildirmake" "${D}/usr/bin/maildirmake" || die "Failed to mv /usr/sbin/maildirmake to /usr/bin/maildirmake"
# Bug #45953, more docs.
cd "${S}"
dohtml -r "${S}"/*
dodoc "${S}"/{00README.NOW.OR.SUFFER,AUTHORS,INSTALL,NEWS,README,ChangeLog} "${FILESDIR}"/${PN}-gentoo.readme
docinto imap
dodoc "${S}"/imap/{ChangeLog,BUGS,BUGS.html,README}
docinto maildir
dodoc "${S}"/maildir/{AUTHORS,INSTALL,README.maildirquota.txt,README.sharedfolders.txt}
docinto tcpd
dodoc "${S}"/tcpd/README.couriertls
}
pkg_postinst() {
elog "Authdaemond is no longer provided by this package."
elog "Authentication libraries are now in courier-authlib."
elog "For a quick-start howto please refer to:"
elog "/usr/share/doc/${P}/${PN}-gentoo.readme.gz"
# Some users have been reporting that permissions on this directory were
# getting scrambled, so let's ensure that they are sane.
chmod 0755 "${ROOT}/usr/$(get_libdir)/${PN}" || die "Failed to ensure sane permissions on ${ROOT}/usr/$(get_libdir)/${PN}"
}
src_test() {
ewarn "make check is not supported by this package due to the"
ewarn "--enable-workarounds-for-imap-client-bugs option."
}
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/courier-imap-4.1.2-r1.ebuild,v 1.3 2008/03/15 23:07:48 halcy0n Exp $
inherit autotools eutils multilib
KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86 ~x86-fbsd"
DESCRIPTION="An IMAP daemon designed specifically for maildirs."
HOMEPAGE="http://www.courier-mta.org/"
SRC_URI="mirror://sourceforge/courier/${P}.tar.bz2"
LICENSE="GPL-2"
SLOT="0"
IUSE="berkdb debug fam gdbm ipv6 nls selinux"
# userpriv breaks linking against vpopmail
RESTRICT="userpriv"
RDEPEND=">=dev-libs/openssl-0.9.6
>=net-libs/courier-authlib-0.57
>=net-mail/mailbase-0.00-r8
berkdb? ( sys-libs/db )
fam? ( virtual/fam )
gdbm? ( >=sys-libs/gdbm-1.8.0 )
selinux? ( sec-policy/selinux-courier-imap )"
DEPEND="${RDEPEND}
dev-lang/perl
!mail-mta/courier
userland_GNU? ( sys-process/procps )"
RDEPEND="${RDEPEND}
!virtual/imapd"
PROVIDE="virtual/imapd"
RC_VER="4.0.6-r1"
INITD_VER="4.0.6-r1"
pkg_setup() {
if ! use berkdb && ! use gdbm ; then
echo
eerror "Either the 'berkdb' or the 'gdbm' USE flag is required."
eerror "Please add it to '/etc/make.conf' or '/etc/portage/package.use'."
eerror "Use 'man 5 portage' for more info on '/etc/portage/package.use'."
echo
die "Required USE flag missing."
fi
}
vpopmail_setup() {
VPOPMAIL_INSTALLED=
VPOPMAIL_DIR=
export VPOPMAIL_INSTALLED VPOPMAIL_DIR
VPOPMAIL_DIR=$(grep ^vpopmail /etc/passwd 2>/dev/null | cut -d: -f6)
VPOPMAIL_INSTALLED=
if has_version 'net-mail/vpopmail' && [[ -n "${VPOPMAIL_DIR}" ]] && [[ -f "${VPOPMAIL_DIR}/etc/lib_deps" ]] ; then
VPOPMAIL_INSTALLED=1
else
VPOPMAIL_DIR=
fi
}
src_unpack() {
unpack ${A}
cd "${S}"
# Bug #48838. Patch to enable/disable FAM support.
# 20 Aug 2004 langthang@gentoo.org
# This patch should fix bug #51540. fam USE flag is not needed for shared folder support.
epatch "${FILESDIR}"/${PN}-4.0.1-disable-fam-configure.in.patch
# Kill unneeded call to AC_PROG_SYSCONFTOOL (bug #168206).
epatch "${FILESDIR}"/${PN}-4.0.6-aclocal-fix.patch
# as-needed fix (bug #168769).
epatch "${FILESDIR}"/${P}-as-needed.patch
# These patches should fix problems detecting BerkeleyDB.
# We now can compile with db4 support.
if use berkdb ; then
epatch "${FILESDIR}"/${PN}-4.0.6-db4-bdbobj_configure.in.patch
epatch "${FILESDIR}"/${PN}-4.0.6-db4-tcpd_configure.in.patch
epatch "${FILESDIR}"/${PN}-4.0.6-db4-configure.in.patch
fi
ebegin "Recreating configure"
AT_NO_RECURSIVE="true" eautoreconf || die "eautoreconf on . failed"
eend $?
cd "${S}/maildir"
ebegin "Recreating maildir/configure"
eautoreconf || die "eautoreconf on maildir failed"
eend $?
cd "${S}/bdbobj"
ebegin "Recreating bdbobj/configure"
eautoreconf || die "eautoreconf on bdbobj failed"
eend $?
cd "${S}/tcpd"
ebegin "Recreating tcpd/configure"
eautoreconf || die "eautoreconf on tcpd failed"
eend $?
}
src_compile() {
vpopmail_setup
local myconf=""
# 19 Aug 2004 langthang@gentoo.org
# Default to gdbm if both berkdb and gdbm are present.
if use gdbm ; then
einfo "Building with GDBM support"
myconf="${myconf} --with-db=gdbm"
elif use berkdb ; then
einfo "Building with BerkeleyDB support"
myconf="${myconf} --with-db=db"
fi
# The default character set is ISO-8859-1/US-ASCII.
# USE 'nls' will enable all available character sets.
# Set ENABLE_UNICODE=iso-8859-1,utf-8,iso-8859-10
# to include only specified translation tables.
if use nls && [[ -z "${ENABLE_UNICODE}" ]] ; then
einfo "ENABLE_UNICODE is not set, building with all available character sets"
myconf="${myconf} --enable-unicode"
elif use nls ; then
einfo "ENABLE_UNICODE is set, building with unicode=${ENABLE_UNICODE}"
myconf="${myconf} --enable-unicode=${ENABLE_UNICODE}"
else
einfo "Disabling unicode support"
myconf="${myconf} --disable-unicode"
fi
use debug && myconf="${myconf} debug=true"
# Fix for bug #21330
CFLAGS="$(echo ${CFLAGS} | xargs)"
CXXFLAGS="$(echo ${CXXFLAGS} | xargs)"
LDFLAGS="$(echo ${LDFLAGS} | xargs)"
# Do the actual build now
LDFLAGS="${LDFLAGS} " econf \
--disable-root-check \
--bindir=/usr/sbin \
--mandir=/usr/share/man \
--sysconfdir=/etc/${PN} \
--libexecdir=/usr/$(get_libdir)/${PN} \
--localstatedir=/var/lib/${PN} \
--with-authdaemonvar=/var/lib/${PN}/authdaemon \
--enable-workarounds-for-imap-client-bugs \
--with-mailuser=mail \
--with-mailgroup=mail \
$(use_with fam) \
$(use_with ipv6) \
${myconf} || die "econf failed"
# Change the pem file location.
sed -i -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/imapd.pem:" \
imap/imapd-ssl.dist || \
die "sed failed"
sed -i -e "s:^\(TLS_CERTFILE=\).*:\1/etc/courier-imap/pop3d.pem:" \
imap/pop3d-ssl.dist || \
die "sed failed"
emake || die "emake failed"
}
src_install() {
vpopmail_setup
dodir /var/lib/$